Cambridgeshire · England

uPVC window & door repair in Fenton, Cambridgeshire

We travel to Fenton for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • Chips and dents
  • Damage during building work
Surface Doctor technician repairing a wooden kitchen worktop

Need uPVC repair in Fenton?

uPVC repair in Fenton without replacing anything

Builders and developers use us for snagging repairs too. We fill and refinish the damage so it blends into the frame, woodgrain finishes included. If you are dealing with holes from removed fittings and alarms and damage during building work, we can generally put it right, on white uPVC, conservatory frames and window frames & sills alike.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

White panel with a damaged edge, shown before and after repair
Location
Fenton (PE28)
Region
Cambridgeshire
Guarantee
One year on every repair
Quotes
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

Work for landlords and builders

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

Repair or replace in Fenton?

A new window, door or sill costs far more, and new uPVC may not match the weathered frames around it. A repair leaves the unit in place. Prices start from £95. A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

Why book with us

  • No need to remove anything
  • Typically one visit, start to finish
  • Colour mixed on the day to match
  • We leave the room as we found it

See our full price list.

Prices and what affects them

Prices start from £95. We price every job individually, from your pictures. The main factors are:

  • Access to the area
  • What the surface is made of
  • Whether old repairs or coatings need taking off
  • The type of damage

Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

Getting a price from pictures

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • Whether it’s been repaired or coated before
  • What it’s made of, if you know
  • Good light, ideally daylight, without flash glare
  • Something in shot to show the size

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Honest limits

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send photos and we will give you a straight answer before booking.

What we work on

  • Doors & door panels
  • White uPVC
  • Conservatory frames
  • Coloured and woodgrain uPVC
  • Window frames & sills

Common questions in Fenton

How do I book?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you cover the whole of Cambridgeshire?

All of Cambridgeshire, and the rest of the UK. Travel is included in the price.

How soon can you come?

We will give you dates with your quote. Tell us if you need it done quickly.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Common problems we fix in Fenton

uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes mark sills, and old fittings leave holes.

These are the problems we’re asked about most:

  • Holes from removed fittings and alarms
  • Chips and dents
  • Scratches from ladders and furniture
  • Damage during building work

Comparing quotes

  • What protection goes down before work starts
  • Whether the price is fixed and includes VAT
  • What prep work is covered
  • What happens if the damage is worse than the pictures show

10 questions to ask before you book

Covering Fenton

Fenton is about 5 miles north of St Ives, in Cambridgeshire. From the centre of Fenton to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Fenton is one of 371 towns and villages in Cambridgeshire where we work. Our nearest city page is London, about 62 miles away.

Our visits in PE28 work the same way as everywhere else we cover. Nearby, we also work in Pidley (1 mile south-east), Old Hurst (2 miles south-west), West End (2 miles south), Woodhurst (2 miles south) and Somersham (3 miles east). We also work in nearby towns such as St Neots (15 miles south-west), Huntingdon (6 miles south-west), St Ives (5 miles south), Ely (14 miles east), March (12 miles north-east) and Whittlesey (11 miles north).

Around Fenton

Around Fenton, we work in homes near Church of All Saints and Warboys Primary Academy. Nearby you’ll also find Ramsey Rural Museum (3.8 miles north). Open spaces near Fenton include Pingle Wood and Cutting.

Map of Fenton © OpenStreetMap contributors

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

The process

Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and we start. It normally takes a morning or an afternoon, and we will keep you posted as we go.

  1. We start by cleaning the frame.
  2. We fill scratches, chips and holes.
  3. We smooth the repair.
  4. We match the colour, including woodgrain finishes.
  5. The repair is blended into the surface around it.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Move bottles, mats and clutter away from the area
  • Open a window if you can

Get a quote

For a price in Fenton, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Send photos for a quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.