Shropshire · England

uPVC Repair for Hanmer homes

Local uPVC repair for Hanmer: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Holes from removed fittings and alarms
  • Damage during building work
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in Hanmer

When to call us in Hanmer

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and old fittings leave holes.

Send us a picture if you notice any of these:

  • Damage during building work
  • Chips and dents
  • Scratches from ladders and furniture
  • Burns on sills

Before you book anyone

  • The length of the guarantee and what it covers
  • Whether the colour is mixed to match
  • What prep work is covered
  • How your room will be protected

10 questions to ask before booking

uPVC repair in Hanmer, done in place

Builders and developers use us for snagging repairs too. We fill and refinish the damage so it blends into the frame, woodgrain finishes included. If you are dealing with holes from removed fittings and alarms and burns on sills, we can usually put it right, whatever the material.

Every job is backed for twelve months in Hanmer and everywhere else. We return to put right any problem with the work. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Damaged white panel edge repaired, before and after
Location
Hanmer (SY13)
Area hub
Shropshire
Cover
A year, on every repair
Quotes
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026

What uPVC repair costs

Repairs from £95. There’s no area surcharge for Hanmer. What changes the price is:

  • What kind of damage it is
  • Doing more than one item at once
  • What the surface is made of
  • The size and number of damaged areas

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Quotes from your pictures

You can take the photos on your phone. Make sure they show:

  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates
  • A clear, close picture of the problem area
  • Any earlier repairs or coatings

If you’re in Hanmer and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Hanmer: your questions answered

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.

What if the damage is worse than the photos show?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How quickly can you book me in?

That depends on our diary for your area. We will offer you dates when we send your quote.

Do you repair coloured uPVC?

Yes. Colour and grain are matched by hand.

How do I get a price for uPVC repair in Hanmer?

Repairs from £95. Because every job differs, we price from photos. You will get a fixed figure before you book.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Hanmer and nearby

Hanmer is about 10 miles south-east of Wrexham, in Shropshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Hanmer is one of 433 towns and villages in Shropshire we cover. You can also see our page for Liverpool, about 32 miles away.

Every address in SY13 is covered, from the main roads to the quietest streets. Whether you live on Striga Lane, Glendower Place and Striga Bank or anywhere nearby, a technician can come to you. Neighbouring places we cover include Arowry (1 mile south), Maelor South (2 miles south-west), Penley (2 miles west), Rowe (3 miles south) and Tallarn Green (3 miles north). Within a short drive, we also cover Oswestry (12 miles south-west), Market Drayton (14 miles east), Whitchurch (5 miles east), Wem (7 miles south-east), Ellesmere (5 miles south-west) and Harlescott (15 miles south).

Landmarks near Hanmer

We visit homes around The Maelor School, St Chad's Church and Hanmer Arms. Further afield, we also cover the area around Penley Community Hospital (2.5 miles west) and Oswestry Town Museum (2.7 miles east). The countryside around Hanmer includes Hanmer Mere.

Map of Hanmer © OpenStreetMap contributors

Repairing versus replacing in Hanmer

A new window, door or sill is a much bigger job, and it may not match the rest after years of weathering. Repairing the damage keeps the original. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Why choose Surface Doctor in Hanmer

  • Everything repaired in place
  • Colour-matched on site
  • Normally one visit, start to finish
  • We leave the room as we found it

See our pricing.

Landlords, agents and businesses in Hanmer

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

The process

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for a morning or an afternoon from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We start by cleaning the frame.
  2. Scratches, chips and holes are filled.
  3. The repair is sanded smooth.
  4. The finish is colour-matched, woodgrain included.
  5. The repair is blended into the surface around it.

Before we arrive

  • Let the surface dry out before the visit
  • Tell us about parking, stairs or access
  • Keep pets and children out of the room while we work

Getting a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.

Get a fixed price

Related advice

When we’d advise against a repair

Some jobs are not right for a repair, including:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send pictures and we’ll say what we think before you book.

Materials we repair

  • Doors & door panels
  • Conservatory frames
  • Window frames & sills
  • White uPVC
  • Coloured and woodgrain uPVC
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.