Norfolk · England

uPVC window & door repair in Hengrave, Norfolk

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills at your home in Hengrave, with a one-year guarantee on every repair.

  • Repairs from £95
  • Scratches from ladders and furniture
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

Book uPVC repair in Hengrave

uPVC repair in Hengrave, done in place

We fill and refinish the damage so it blends into the frame, including woodgrain finishes. We also do snagging repairs for builders. We work on window frames & sills, coloured and woodgrain uPVC and doors & door panels, and the jobs we see most are holes from removed fittings and alarms and damage during building work.

Your repair is guaranteed for a year, as with every job we do. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

Damaged white panel edge repaired, before and after
Location
Hengrave (NR9)
Region
Norfolk
Guarantee
A year, on every repair
Quote
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

When we would advise against a repair

Some jobs are not right for a repair, including:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Hengrave

  • Coloured and woodgrain uPVC
  • Doors & door panels
  • Conservatory frames
  • White uPVC
  • Window frames & sills

Why repair rather than replace?

A new window, door or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair leaves the unit in place. Our uPVC repair starts from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

What you get with us

  • Repair technicians who travel to you, UK-wide
  • Typically one visit, start to finish
  • No need to remove anything
  • Honest advice, even when it means no job

See our pricing.

What we do, step by step

On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take a morning or an afternoon, tidy-up included.

  1. We start by cleaning the frame.
  2. Scratches, chips and holes are filled.
  3. We smooth the repair.
  4. The finish is colour matched, woodgrain included.
  5. The repair is blended into the surface around it.

Preparing for the visit

  • Have somewhere for us to park nearby if possible
  • Mention if the room is upstairs or in a flat
  • Tell us about parking, stairs or access

Getting a price

Most clients in Hengrave get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Get a fixed price

Advice

Should I try a DIY kit first?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

How we price uPVC repair

Prices start from £95. Every quote is fixed and free. What we take into account:

  • How many items we do on one visit
  • Access to the area
  • How hard the colour is to match
  • The material

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Getting a price from pictures

Photographing the damage takes a minute, and it saves a visit. Please include:

  • The postcode, so we can plan the visit
  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size
  • Whether it’s been repaired or coated before

To get a price, send two or three pictures using our quote form or ring us. We’ll say straight away whether it can be repaired.

Signs you need uPVC repair in Hengrave

uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and old fittings leave holes.

The most common problems we’re called about are:

  • Damage during building work
  • Burns on sills
  • Chips and dents
  • Holes from removed fittings and alarms

Before you book anyone

  • What the guarantee covers, and for how long
  • How the room is protected while they work
  • What prep work is covered
  • Whether the colour is mixed to match

10 questions to ask before you book

About Hengrave

Hengrave is about 9 miles north-west of Norwich, in Norfolk. From the centre of Hengrave to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 797 towns and villages across Norfolk, from the larger towns to small villages.

Postcode districts we cover here: NR9. Neighbouring places we cover include Swannington (1 mile south-east), Alderford (1 mile south-west), Brandiston (1 mile north), Attlebridge (1 mile south) and Morton on the Hill (2 miles south-west). Larger places within reach include Norwich (9 miles south-east), Dereham (10 miles west), Wymondham (11 miles south), Sprowston (9 miles south-east), Thorpe St Andrew (10 miles south-east) and North Walsham (12 miles north-east).

What’s near Hengrave

We visit homes around Church of St Margaret, among other places.

Map of Hengrave © OpenStreetMap contributors

For landlords and businesses

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Hengrave questions

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

What happens next?

You get a fixed price and available dates. If we need another angle, we’ll ask.

Can a burnt window sill be fixed?

Yes. We fill and refinish the burnt area to match.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

It’s been repaired before. Can you still fix it?

Yes, we often do. Removing the old work can add time, and that is in the quote.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Is it worth repairing rather than replacing?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.