Oxfordshire · England

uPVC window & door repair in Highmoor, Oxfordshire

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills at your home in Highmoor, with a one-year guarantee on every repair.

  • Repairs from £95
  • Chips and dents
  • Burns on sills
Surface Doctor technician repairing a wooden kitchen worktop

Book uPVC repair in Highmoor

When to call us in Highmoor

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes mark sills, and old fittings leave holes.

People normally call us when they notice one of these:

  • Scratches from ladders and furniture
  • Burns on sills
  • Chips and dents
  • Holes from removed fittings and alarms

Questions to ask before booking

  • How long it needs to cure
  • If travel is included in the price
  • Whether cleaning and preparation are in the price
  • How the colour is matched

How to compare quotes

uPVC repair in Highmoor without replacing anything

We fill and refinish the damage to match the frame, woodgrain finishes included. Builders and developers use us for snagging repairs too. If you are dealing with scratches from ladders and furniture and damage during building work, we can normally put it right, whatever the material.

The work is covered for a year after we finish. Just call us if there’s a problem and we will come back. Warm soapy water and a soft cloth are all it needs. Do not use solvents or scourers.

Location
Highmoor (RG9)
County
Oxfordshire
Cover
One year on every repair
Price
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
White panel with a damaged edge, shown before and after repair

When a repair is not the answer

Not everything can be repaired, and we would rather say so up front. We cannot fix:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send pictures and we will say what we think.

Materials we work on in Highmoor

  • Coloured and woodgrain uPVC
  • Doors & door panels
  • Window frames & sills
  • Conservatory frames
  • White uPVC

Highmoor and nearby

Highmoor is about 4 miles north-west of Henley-on-Thames, in Oxfordshire. From the centre of Highmoor to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Highmoor is one of 443 towns and villages in Oxfordshire we cover. You can also see our page for London, about 39 miles away.

Postcode districts we cover here: RG9. Jobs here include addresses on The Glebe and Holly Close and the roads around them. If you are just outside Highmoor, we cover Highmoor Cross (1 mile south-east), Shepherd's Green (1 mile south-east), Catslip (1 mile north-east), Nettlebed (2 miles north) and Kingwood Common (2 miles south). Further out, we also cover Didcot (11 miles west), Abingdon-on-Thames (15 miles north-west), Thame (13 miles north), Henley-on-Thames (4 miles south-east), Benson (6 miles north-west) and Chinnor (11 miles north).

Local landmarks in Highmoor

Around Highmoor, we work in homes near Church of St Paul, The Dog and Duck pub and Stoke Row Church of England School. For rail, the closest station is Henley-On-Thames station, about 4.5 miles east. Open spaces near Highmoor include Warburg Nature Reserve.

Map of Highmoor © OpenStreetMap contributors

Should I try a DIY kit first?

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

For landlords and businesses

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

What affects the price in Highmoor

Prices start from £95. A fixed quote means you know the cost before booking. We look at:

  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match
  • Access to the area
  • Whether old repairs or coatings need taking off

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Getting a price from pictures

You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:

  • Whether it’s been repaired or coated before
  • A wider photo showing the whole window, door or sill
  • A clear, close picture of the problem area
  • The material, if you know it

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

How it works

On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take a morning or an afternoon.

  1. First the frame or panel is cleaned.
  2. We fill scratches, chips and holes.
  3. The repair is sanded smooth.
  4. The finish is colour matched, woodgrain included.
  5. We blend the repair into the surrounding surface.

Preparing for the visit

  • Let us know which floor the room is on
  • Move bottles, mats and clutter away from the area
  • Mention any parking restrictions or tricky access

Getting a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Get a free quote

Related advice

Highmoor: your questions answered

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Which areas do you work in?

We work UK-wide, and that includes Highmoor. Our prices are the same everywhere.

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Can you repair something that’s been repaired before?

Most of the time. Let us know what was used before and we will plan for it.

Are there extra charges for Highmoor?

Travel is included in the price, with the same prices everywhere we work.

Do you cover Highmoor?

Yes. We work across the UK and travel to Highmoor and the rest of Oxfordshire. Send photos and we will quote, or call 0345 017 0787.

Can you repair a burn on a uPVC sill?

Yes. We fill and refinish the burnt area to match.

Repair or replace: which is better?

A new window, door or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair keeps the original. Prices start from £95. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why Highmoor clients choose us

  • We leave the room as we found it
  • Colours mixed by hand to suit your surface
  • Technicians who travel to you, UK-wide
  • A year’s guarantee on all work

Take a look at our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.