Devon · England

uPVC Repair in Highweek

We travel to Highweek for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • Burns on sills
  • Chips and dents
Surface Doctor technician repairing a wooden kitchen worktop

Book uPVC repair in Highweek

For landlords and businesses

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

We work for landlords, letting agents and housing providers in Highweek as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

About our uPVC repair in Highweek

The damage is filled and refinished so it blends into the frame, woodgrain finishes included. Builders and developers use us for snagging repairs too. We are frequently asked to fix holes from removed fittings and alarms and scratches from ladders and furniture, on window frames & sills, conservatory frames and coloured and woodgrain uPVC.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

White panel with a damaged edge, shown before and after repair
Area
Highweek (TQ12)
Area hub
Devon
Warranty
A year, on every repair
Price
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

Why repair rather than replace?

Replacing the frame or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair leaves the unit in place. Repairs from £95, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • One visit for most repairs
  • Everything repaired in place
  • Honest advice, even when it means no job
  • Repair technicians who travel to you, UK-wide

Read our prices page.

Highweek questions

How do I book?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

It’s been repaired before. Can you still fix it?

Yes, regularly. Removing the old work can add time, and that is in the quote.

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.

Do you cover the whole of Devon?

All of Devon, and the rest of the UK. Travel is included in the price.

What happens next?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.

How much does uPVC repair cost in Highweek?

Repairs from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

What if the damage is worse than the pictures show?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Signs you need uPVC repair in Highweek

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and removed fittings leave holes.

Send us a photo if you notice any of these:

  • Damage during building work
  • Holes from removed fittings and alarms
  • Scratches from ladders and furniture
  • Burns on sills

What your quote should include

  • A fixed quote, and whether VAT is included
  • How to look after the finish
  • Whether cleaning and preparation are in the price
  • If travel is included in the price

Choosing a repair company

What uPVC repair costs

Repairs from £95. We don’t charge extra for travel to Highweek. The price comes down to:

  • What the surface is made of
  • How hard the colour is to match
  • Where the damage is and how we get to it
  • How many areas need work

The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Send photos for a quote

You can generally get a fixed price without us visiting. To help us price it:

  • The material, if you know it
  • A photo taken from further back
  • One sharp close-up of the damage
  • Good light, ideally daylight, without flash glare

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

When a repair isn’t the answer

A few problems are outside what a surface repair can do:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us photos and we will tell you honestly.

What we work on

  • White uPVC
  • Coloured and woodgrain uPVC
  • Window frames & sills
  • Doors & door panels
  • Conservatory frames

DIY kit or professional repair?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

Our work in Highweek

Highweek is about 1 mile north-west of Newton Abbot, in Devon. Our technicians come to customers in Highweek, so nothing has to leave your home. Highweek is one of 586 towns and villages in Devon where we work.

Here we cover the TQ12 postcode area. From Wain Lane, Water Lane and Manor Road or a nearby road, we can come to you. With the A382 and A383 close by, Highweek is simple for us to get to. Other places close to Highweek include Newton Abbot (1 mile south-east), Wolborough (1 mile south-east), East Ogwell (1 mile south), Abbotskerswell (2 miles south) and Denbury (2 miles south-west). Larger places within reach include Exeter (14 miles north), Exmouth (12 miles north-east), Teignmouth (6 miles east), Dawlish (8 miles north-east), St Thomas (13 miles north) and Larkbeare (13 miles north).

Near you in Highweek

Around Highweek, we work in homes near St Joseph's Catholic Primary School, The Highweek Inn and Parish Church of All Saints. Also close by are Coombeshead Academy (under half a mile south-east), Passmore Edwards Centre (0.8 miles south-east), South Devon UTC (0.9 miles east) and Courtenay Park (1.3 miles south-east). The closest station to Highweek is Newton Abbot station, roughly 1.4 miles east. A little further out are Newton Abbot Museum (0.8 miles south-east) and Newton Abbot Community Hospital (0.7 miles east). Green spaces nearby include Chudleigh Knighton Heath.

Map of Highweek © OpenStreetMap contributors

What we do, step by step

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for a morning or an afternoon. Before leaving, we tell you how long to leave it and how to look after it.

  1. We start by cleaning the frame.
  2. We fill scratches, chips and holes.
  3. The repair is sanded smooth.
  4. The finish is colour-matched, woodgrain included.
  5. The repair is blended into the surface around it.

Preparing for the visit

  • Mention any parking restrictions or tricky access
  • Let us know which floor the room is on
  • Point us to the nearest place to park

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.

Get a fixed quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.