Wrexham · Wales
uPVC window & door repair in Holt, Wrexham
uPVC repair for Holt, without a refit. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- Scratches from ladders and furniture
- Holes from removed fittings and alarms
uPVC repair in Holt, done in place
The damage is filled and refinished so it blends into the frame, woodgrain finishes included. We also do snagging repairs for builders. We work on window frames & sills, doors & door panels and conservatory frames, and the jobs we see most are chips and dents and damage during building work.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. Clean with warm soapy water and a soft cloth. Do not use solvents or scourers.
- Area
- Holt (LL13)
- Area hub
- Wrexham
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- Where the damage is and how we get to it
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can take the pictures on your phone. Ensure they show:
- The material, if you know it
- A clear, close picture of the problem area
- Something in shot to show the size
- Whether it’s been repaired or coated before
The quickest way to a price is to send a couple of photos through our quote form or call us. We will say straight away if a repair is the right fix.
Holt questions
Can you redo someone else’s repair?
Normally, yes. We remove the old repair before doing a new one.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your photos and you will get one combined price.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
What happens next?
We come back with a fixed price. There is no obligation to book.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
How the visit works
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. You can expect it to take a morning or an afternoon, and we will tell you if anything changes.
- We start by cleaning the frame.
- We fill scratches, chips and holes.
- The repair is sanded smooth.
- We colour-match the finish, including woodgrain effects.
- We blend the repair into the surrounding surface.
Preparing for the visit
- Let us know about parking or access
- Ensure the room can be ventilated
- Mention any earlier repairs or resurfacing
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the window, door or sill, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Honest limits
In fairness, some problems need a different fix:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Window frames & sills
- White uPVC
- Conservatory frames
- Doors & door panels
- Coloured and woodgrain uPVC
For landlords and businesses
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
We carry out planned and one-off repairs for housing associations and facilities teams in Wrexham and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Signs you need uPVC repair in Holt
uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and removed fittings leave holes.
Send us a photo if you notice any of these:
- Holes from removed fittings and alarms
- Scratches from ladders and furniture
- Damage during building work
- Chips and dents
Comparing quotes
- Whether they match the colour on site
- Aftercare advice
- What preparation is included
- How long the guarantee is and what it covers
What else we do in Holt
Holt and the surrounding area
Holt is about 5 miles north-east of Wrexham, in Wrexham. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover 115 places in Wrexham, from the larger towns to small villages. You can also see our page for Liverpool, about 23 miles away.
Our visits in LL13 are booked in the same way as anywhere else. You’ll find streets such as Castle Street, Fairview and Castle Mews, and we cover them all. We also travel to Farndon (1 mile north-east), Crewe-by-Farndon (1 mile east), Stretton (2 miles east), Barton (2 miles east) and Coddington (3 miles north-east). Further out, we also cover Wrexham (5 miles south-west), Caia Park (4 miles south-west), Offa (6 miles south-west), Rhosllannerchrugog (8 miles south-west), Rhosddu (5 miles west) and Acton (4 miles west).
Near you in Holt
Locally, our jobs take us to homes close to Hand & Heart Hotel, Holt English Presbyterian Church and Holt's Community Primary School. Further afield, we also cover the area around Holt Castle (within half a mile east) and Trevalyn Manor (3.1 miles north-west). Green spaces nearby include Pant-yr-ochain Big Pool and Wilderness Tip (Gresford).
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Should you replace it?
A new window, door or sill costs far more, and it may not match the rest after years of weathering. A repair leaves the unit in place. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- A fixed quote before booking
- No extra charge for your area
- CHAS and Constructionline accredited
- Work done at your home or business
Take a look at our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
