Somerset · England

uPVC Repair for Horsington Marsh homes

uPVC repair across Horsington Marsh and nearby, typically in one visit and guaranteed for a year.

  • Repairs from £95
  • Damage during building work
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

Trusted uPVC repair in Horsington Marsh

uPVC repair in Horsington Marsh without replacing anything

We fill and refinish the damage to match the frame, woodgrain finishes included. Builders and developers use us for snagging repairs too. We work on doors & door panels, white uPVC and window frames & sills, and the jobs we see most are holes from removed fittings and alarms and chips and dents.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it. Clean with warm soapy water and a soft cloth. Don’t use solvents or scourers.

Damaged white panel edge repaired, before and after
Location
Horsington Marsh (BA8)
County
Somerset
Guarantee
A year, on every repair
Quotes
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026

Common problems we fix in Horsington Marsh

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes mark sills, and old fittings leave holes.

You may need us if you’ve spotted any of these:

  • Damage during building work
  • Chips and dents
  • Scratches from ladders and furniture
  • Burns on sills

Questions to ask before booking

  • How the colour is matched
  • What protection goes down before work starts
  • Whether a trained technician does the job
  • How long it needs to cure

Our hiring checklist

What uPVC repair costs

Repairs from £95. You won’t pay by the hour. The price depends on:

  • Doing more than one item at once
  • Previous DIY repairs that have to come out
  • Access to the area
  • Unusual colours or finishes

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

How to get a fixed quote

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • Daylight if possible, and no flash reflection
  • One picture of the whole window, door or sill
  • Any earlier repairs or coatings
  • A close-up of the damage, in focus

Send us a photo of the damage and one of the whole item, and tell us you are in Horsington Marsh, and we will reply with a fixed quote.

Should you replace it?

Replacing the frame or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair leaves the unit in place. Prices start from £95. A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why us?

  • Fixed prices from your photos
  • Everything repaired in place
  • A year’s guarantee on all work
  • CHAS, Constructionline and SafeContractor accredited

See our full price list.

Common questions in Horsington Marsh

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so let us know about it.

Is there a call-out fee?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Can you match woodgrain uPVC?

Yes. Colour and grain are matched by hand.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.

How much does uPVC repair cost in Horsington Marsh?

Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.

What we can’t put right

A repair is not right for every job, including:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send photos and we’ll say what we think before you book.

Materials we work on in Horsington Marsh

  • Conservatory frames
  • Window frames & sills
  • White uPVC
  • Doors & door panels
  • Coloured and woodgrain uPVC

Horsington Marsh and the surrounding area

Horsington Marsh is about 12 miles north-east of Yeovil, in Somerset. Whether you’re in the middle of Horsington Marsh or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Horsington Marsh is one of 640 towns and villages in Somerset where we work.

Jobs in BA8 work the same way as everywhere else we cover. Local streets include Batchpool Lane and Marsh Lane, all of which we cover. We also travel to Combe Throop (1 mile south), Horsington (1 mile south-west), South Cheriton (1 mile west), Abbas Combe (1 mile south-west) and North Cheriton (2 miles west). We also work in nearby towns such as Yeovil (12 miles south-west), Frome (15 miles north), Shepton Mallet (13 miles north-west), Somerton (15 miles west), Castle Cary (7 miles north-west) and Preston Plucknett (12 miles south-west).

Local landmarks in Horsington Marsh

We visit homes around Horsington Church School, Church of St John the Baptist and King Arthur's Community School. The nearest railway station is Templecombe station, about 1.5 miles south. Nearby you will also find Ballands Castle (4.5 miles north-east).

Map of Horsington Marsh © OpenStreetMap contributors

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

Work for landlords and builders

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

The process

We agree an arrival time beforehand, so you are not left guessing. On site, it takes a morning or an afternoon for most jobs. We leave the room clean and you’ll know when it can be used.

  1. We clean the frame or panel.
  2. We fill scratches, chips and holes.
  3. We smooth the repair.
  4. The finish is colour matched, woodgrain included.
  5. We blend the repair into the surrounding surface.

Getting ready for the visit

  • Ensure the area is dry
  • Keep a parking space free if you can
  • Move bottles, mats and clutter away from the area

How to get a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire window, door or sill, add your postcode and send them over. You’ll get a fixed price, not an estimate.

Get a fixed quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.