Oxfordshire · England

uPVC Repair for Kencot homes

Our technicians come to Kencot for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Scratches from ladders and furniture
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in Kencot

Why repair rather than replace?

Replacing the frame or sill costs far more, and new uPVC may not match the weathered frames around it. Repairing the damage leaves the unit in place. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why Kencot clients choose us

  • No need to remove anything
  • Fixed prices from your pictures
  • Accredited with CHAS, Constructionline and SafeContractor
  • Generally one visit, start to finish

See our prices page.

How we handle uPVC repair in Kencot

We also do snagging repairs for builders. We fill and refinish the damage to match the frame, woodgrain finishes included. Common call-outs are for scratches from ladders and furniture and damage during building work, on window frames & sills, doors & door panels and white uPVC.

You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

White panel with a damaged edge, shown before and after repair
Location
Kencot (OX18)
County
Oxfordshire
Cover
12 months on all our work
Quotes
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026

Common questions in Kencot

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Can you repair a burn on a uPVC sill?

Yes. We fill and refinish the burnt area to match.

Can I get a quote without a visit?

Typically, yes. Clear photos let us give you a fixed price without visiting.

Can you repair something that’s been repaired before?

Yes, we frequently do. Removing the old work can add time, and that is in the quote.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

What areas do you cover?

Across the UK, so Kencot is covered. Our prices are the same everywhere.

What information do you need?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Work for landlords and builders

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Common problems we fix in Kencot

uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and removed fittings leave holes.

If you can see any of these, send us a photo:

  • Holes from removed fittings and alarms
  • Scratches from ladders and furniture
  • Damage during building work
  • Chips and dents

What to look for in a quote

  • What protection goes down before work starts
  • What happens if the damage is worse than the photos show
  • How soon you can use it again
  • Is the price fixed, and does it include VAT?

Our hiring checklist

What a repair can’t fix

In fairness, there are a few things a repair won’t fix:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send photos and we will say what we think.

Materials we repair

  • Doors & door panels
  • Window frames & sills
  • White uPVC
  • Conservatory frames
  • Coloured and woodgrain uPVC

Prices and what affects them

Prices start from £95. You’ll know the full cost before booking. We look at:

  • What kind of damage it is
  • Doing more than one item at once
  • The colour and finish to match
  • The size and number of damaged areas

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

How to get a fixed price

When you take your pictures, these tips help us give you a firm price:

  • The postcode, so we can plan the visit
  • A picture taken from further back
  • Daylight if possible, and no flash reflection
  • Any details about the material

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the window, door or sill, include your postcode and send them over. What comes back is a fixed price, not a guess.

What we do, step by step

We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a morning or an afternoon in most cases. We leave the room clean.

  1. We clean the frame or panel.
  2. Next we fill the damage.
  3. We smooth the repair.
  4. The finish is colour-matched, woodgrain included.
  5. We blend the repair into the surrounding surface.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Clear the area around the damage
  • Tell us about parking, stairs or access

Ask for a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

Get a fixed price

Advice

Kencot and nearby

Kencot is about 2 miles south-west of Carterton, in Oxfordshire. Jobs in Kencot are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We work in 443 places in Oxfordshire. We work right across the region, from Kencot to Birmingham (about 52 miles away).

Postcode districts we cover here: OX18. Close by, we cover Alvescot (1 mile south-east), Filkins (2 miles west), Langford (2 miles south-west), Shilton (2 miles north) and Broughton Poggs (2 miles west). We also work in nearby towns such as Abingdon-on-Thames (15 miles east), Witney (6 miles north-east), Wantage (13 miles south-east), Grove (12 miles south-east), Faringdon (6 miles south) and Kidlington (15 miles east).

Around Kencot

In Kencot, that means homes near Carterton Community College, St Peter's Church of England School and The Plough pub, among other places. Well-known places in the area include Swinford Museum (1.9 miles west) and Longworth Hospital (5.9 miles south).

Map of Kencot © OpenStreetMap contributors

Can I fix it myself?

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.