Kent · England

uPVC Repair in Knave's Ash

We travel to Knave's Ash for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Chips and dents
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

Trusted uPVC repair in Knave's Ash

uPVC repair at your home in Knave's Ash

Builders and developers use us for snagging repairs too. We fill and refinish the damage so it blends into the frame, including woodgrain finishes. If you are dealing with chips and dents and holes from removed fittings and alarms, we can help.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Area
Knave's Ash (CT3)
County
Kent
Cover
12 months on all our work
Price
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026
Damaged white panel edge repaired, before and after

Should I try a DIY kit first?

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

Honest limits

Some jobs are not right for a repair, for example:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send photos and we’ll say what we think.

What we work on

  • Window frames & sills
  • Conservatory frames
  • Coloured and woodgrain uPVC
  • White uPVC
  • Doors & door panels

What we are called out for in Knave's Ash

uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and removed fittings leave holes.

Common reasons people in Knave's Ash contact us are:

  • Holes from removed fittings and alarms
  • Damage during building work
  • Scratches from ladders and furniture
  • Burns on sills

Comparing quotes

  • When it can be used again
  • Is the price fixed, and does it include VAT?
  • How changes to the job are handled
  • What prep work is covered

Our hiring checklist

Landlord and trade work in Knave's Ash

For anyone letting property in or around Knave's Ash, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Where we work around Knave's Ash

Knave's Ash is about 2 miles south of Herne Bay, in Kent. Anywhere in CT3, a technician comes to you. Knave's Ash is one of 922 places in Kent we cover. We work right across the region, from Knave's Ash to London (about 55 miles away).

Here we cover the CT3 postcode area. You’ll find streets such as Hicks Forstal Road and Hoath Road. Other places close to Knave's Ash include Hoath (1 mile east), Maypole (1 mile north-east), Old Tree (1 mile north-east), Millbank (1 mile north-east) and Hicks Forstal (1 mile west). Within a short drive, we also cover Canterbury (5 miles south-west), Margate (10 miles east), Dover (15 miles south-east), Ramsgate (11 miles east), Broadstairs (12 miles east) and Whitstable (5 miles west).

Local landmarks in Knave's Ash

Our clients here include homes close to Spires Academy, Curtis Wood and Hoath Primary School, among other places. For rail, the closest station is Herne Bay station, about 2.6 miles north-west. Nearby you will also find St Martins Hospital (4.4 miles south-west). Green spaces nearby include West Blean and Thornden Woods.

Map of Knave's Ash © OpenStreetMap contributors

Repairing versus replacing in Knave's Ash

Replacing the frame or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair keeps the original. Prices start from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • Work done at your home or business
  • Free fixed quotes from pictures
  • One price list for the whole UK
  • Honest advice, even when it means no job

Read our prices page.

Your questions about uPVC repair in Knave's Ash

What happens once I’ve sent photos?

We check the damage, the material and your postcode, then reply with a quote with dates.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

How do I book?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

Do you cover the whole of Kent?

Across the UK, and that includes Knave's Ash. Our prices are the same everywhere.

Can you repair several things at once?

Of course, and it generally saves money. Send pictures of everything together and we’ll quote them together.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Is it messy?

No. The work area is masked and covered, and we leave the room clean.

What does uPVC repair cost?

Repairs from £95. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your CT3 postcode.

How the visit works

Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, and we leave the room as we found it.

  1. We clean the frame or panel.
  2. Next we fill the damage.
  3. We smooth the repair.
  4. We colour-match the finish, including woodgrain effects.
  5. The repair is blended into the surface around it.

How to prepare

  • Let the surface dry out before the visit
  • Open a window if you can
  • Mention any earlier repairs or resurfacing

How to get a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a fixed price

Read more

How we price uPVC repair

Repairs from £95. We price every job individually, from your pictures. The main factors are:

  • What the surface is made of
  • Whether old repairs or coatings need taking off
  • The type of damage
  • Doing more than one item at once

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Getting a price from photos

Phone pictures are fine, there’s no need for anything special. Just make sure we can see:

  • What it’s made of, if you know
  • A wider photo showing the entire window, door or sill
  • Any earlier repairs or coatings
  • Natural light rather than flash

Upload pictures of the damage and a wider shot of the whole item, and tell us you’re in Knave's Ash, and we’ll come back with a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.