Kent · England

uPVC window & door repair in Maltman's Hill, Kent

uPVC repair for Maltman's Hill, without a refit. Send us photos for a fixed quote, then we come to you.

  • Repairs from £95
  • Burns on sills
  • Chips and dents
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair near Maltman's Hill

uPVC repair at your home in Maltman's Hill

Builders and developers use us for snagging repairs too. The damage is filled and refinished to match the frame, including woodgrain finishes. We work on white uPVC, window frames & sills and conservatory frames, and the jobs we see most are damage during building work and holes from removed fittings and alarms.

Whatever the size of the job, it’s backed by a one-year guarantee. Clean with warm soapy water and a soft cloth. Don’t use solvents or scourers.

White panel with a damaged edge, shown before and after repair
Where
Maltman's Hill (TN27)
Area hub
Kent
Warranty
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026

FAQs for Maltman's Hill

Do you repair coloured uPVC?

Yes. Colour and grain are matched by hand.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

Do you cover Maltman's Hill?

We do. Repair technicians travel to Maltman's Hill from across the region, and the price is the same as everywhere else.

What if the damage is worse than the photos show?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Is it worth repairing rather than replacing?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Is it safe with children and pets around?

Just keep them out of the work area. We’ll tell you when the room can be used again.

Landlord and trade work in Maltman's Hill

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

What uPVC repair costs

Prices start from £95. You’ll know the full cost before booking. We look at:

  • Unusual colours or finishes
  • How easy the damage is to reach
  • How many items we do on one visit
  • The size and number of damaged areas

Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.

Send photos for a quote

Most quotes are done from pictures alone. To make it quick:

  • A coin or ruler next to the damage for scale
  • What it’s made of, if you know
  • The postcode, so we can plan the visit
  • Any earlier repairs or coatings

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.

Should you replace it?

A new window, door or sill costs far more, and it may not match the rest after years of weathering. A repair keeps the original. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why choose Surface Doctor in Maltman's Hill

  • Everything repaired in place
  • We’ll tell you if it’s not worth repairing
  • Normally one visit, start to finish
  • Rooms protected and left tidy

Take a look at our pricing.

Do you need uPVC repair in Maltman's Hill?

uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and old fittings leave holes.

The most common problems we are called about are:

  • Burns on sills
  • Scratches from ladders and furniture
  • Holes from removed fittings and alarms
  • Damage during building work

Comparing quotes

  • Whether the colour is mixed to match
  • Whether the price covers travel
  • What happens if the damage is worse than the photos show
  • When it can be used again

Our hiring checklist

What we cannot put right

It helps to know what we cannot do:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send photos and we will give you a straight answer before booking.

What we work on

  • Doors & door panels
  • Conservatory frames
  • White uPVC
  • Window frames & sills
  • Coloured and woodgrain uPVC

Our work in Maltman's Hill

Maltman's Hill is about 6 miles west of Ashford, in Kent. From the centre of Maltman's Hill to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our technicians cover all 922 towns and villages across Kent. Our jobs stretch from Maltman's Hill to London (42 miles away).

We cover every part of the TN27 postcode area and the streets around it. We also travel to Wissenden (1 mile south), Chambers' Green (1 mile east), Pluckley Thorne (2 miles north-east), Fir Toll (2 miles north-east) and Newland Green (2 miles north). Within a short drive, we also cover Maidstone (11 miles north-west), Ashford (6 miles east), Sittingbourne (13 miles north), Faversham (13 miles north-east), Davington (13 miles north-east) and Foley Park (12 miles north-west).

Local landmarks in Maltman's Hill

For rail, the closest station is Pluckley station, about 1.2 miles east. Nearby you’ll also find Romden Castle (0.7 miles south-west).

Map of Maltman's Hill © OpenStreetMap contributors

What we do, step by step

Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We start by cleaning the frame.
  2. Next we fill the damage.
  3. We sand the repair smooth.
  4. The finish is colour-matched, woodgrain included.
  5. We blend the repair into the surrounding surface.

Before we arrive

  • Let us know which floor the room is on
  • Let the surface dry out before the visit
  • Tell us about any previous repairs or coatings

Get a quote

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Get a free quote

Advice

Can I fix it myself?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.