Staffordshire · England

uPVC window & door repair in Marston, Staffordshire

uPVC repair for Marston, without a refit. Send us photos for a fixed quote, then we come to you.

  • Repairs from £95
  • Holes from removed fittings and alarms
  • Scratches from ladders and furniture
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in Marston

How we handle uPVC repair in Marston

We fill and refinish the damage to match the frame, woodgrain finishes included. We also do snagging repairs for builders. Common call-outs are for damage during building work and burns on sills, on doors & door panels, coloured and woodgrain uPVC and window frames & sills.

You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Location
Marston (ST18)
Region
Staffordshire
Guarantee
A year, on every repair
Quote
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped white edge filled and refinished

Why repair rather than replace?

A new window, door or sill is a much bigger job, and it may not match the rest after years of weathering. A repair leaves the unit in place. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why us?

  • A year’s guarantee on all work
  • CHAS, Constructionline and SafeContractor accredited
  • We leave the room as we found it
  • One price list for the whole UK

See our prices page.

Do you need uPVC repair in Marston?

uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes mark sills, and old fittings leave holes.

Signs it’s time to call us include:

  • Chips and dents
  • Scratches from ladders and furniture
  • Damage during building work
  • Burns on sills

Before you book anyone

  • What protection goes down before work starts
  • How long it needs to cure
  • Whether the price is fixed and includes VAT
  • The length of the guarantee and what it covers

Choosing a repair company

What happens on the day

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a morning or an afternoon. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. First the frame or panel is cleaned.
  2. Next we fill the damage.
  3. We smooth the repair.
  4. The finish is colour-matched, woodgrain included.
  5. We blend the repair into the surrounding surface.

Getting ready for the visit

  • Open a window if you can
  • Keep children and pets away from the room on the day
  • Move bottles, mats and clutter away from the area

Getting a price

Email us a picture of the damage and one of the entire item, and tell us you are in Marston, and we will reply with a fixed quote.

Send photos for a quote

Related advice

How we price uPVC repair

Prices start from £95. There are no hourly rates or hidden extras. The price depends on:

  • Previous DIY repairs that have to come out
  • Where the damage is and how we get to it
  • How hard the colour is to match
  • The type of damage

We charge the same wherever you are, with no extra for Marston. The job itself decides the price: how much damage, what it’s made of and how many items.

Send pictures for a quote

We price nearly every job from photos. This is what to send:

  • A close-up of the damage, in focus
  • The postcode, so we can plan the visit
  • A picture taken from further back
  • Any details about the material

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.

Where we work around Marston

Marston is about 3 miles north of Stafford, in Staffordshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 512 places in Staffordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 28 miles away.

Our technicians cover all of ST18 and the streets around it. You will find streets such as Marston Lane and Yarlet Lane, and we cover them all. We also travel to Aston-by-Stone (2 miles north), Tillington (2 miles south), Holmcroft (2 miles south), Creswell (2 miles south-west) and Little Stoke (3 miles north). We also work in nearby towns such as Stafford (3 miles south), Newcastle-under-Lyme (13 miles north-west), Cannock (11 miles south), Longton (9 miles north), Rugeley (10 miles south-east) and Burntwood (14 miles south-east).

Local landmarks in Marston

Around Marston, we work in homes near Yarlet School, The Greyhound pub and Church of St Leonard, among other places. The nearest railway station is Stafford station, about 3.4 miles south. Well-known places in the area include Staffordshire Yeomanry Museum (3.1 miles south) and St George's Hospital (2.8 miles south). The countryside around Marston includes Doxey Marshes and Tixall Wide.

Map of Marston © OpenStreetMap contributors

Landlords, agents and businesses in Marston

Housing associations and facilities teams use us for planned and reactive repairs in Staffordshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.

When a repair is not the answer

We won’t take on work that will not last, so these are the limits:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send pictures and we’ll say what we think before booking.

Materials we repair

  • Doors & door panels
  • White uPVC
  • Conservatory frames
  • Coloured and woodgrain uPVC
  • Window frames & sills

DIY repairs versus a professional job

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Marston: your questions answered

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so mention it when you send pictures.

Can you repair a burn on a uPVC sill?

Yes. The burn is filled and refinished to match.

Will the price change on the day?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Which areas do you work in?

We work UK-wide. Prices do not change with location.

What do you need from me?

Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

How soon can you come?

That depends on our diary for your area. We will offer you dates when we send your quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.