Highland · Scotland

uPVC window & door repair in Milton, Highland

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for homes and businesses in Milton and across Highland. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Scratches from ladders and furniture
  • Chips and dents
Surface Doctor technician repairing a wooden kitchen worktop

Trusted uPVC repair in Milton

uPVC repair in Milton without replacing anything

We fill and refinish the damage so it blends into the frame, woodgrain finishes included. We also do snagging repairs for builders. If you’re dealing with damage during building work and holes from removed fittings and alarms, we can help.

Every job is backed for twelve months. We return to put right any problem with the work. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Damaged white panel edge repaired, before and after
Area
Milton (IV18)
Region
Highland
Cover
One year on every repair
Quotes
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026

Where we work around Milton

Milton is about 13 miles north-west of Nairn, in Highland. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover 253 places in Highland, from the larger towns to small villages.

Our repair technicians cover all of IV18 and the streets around it. Streets in the area include Old Station Road, Ross Crescent and Urquhart Close, all of which we cover. If you’re just outside Milton, we cover Kildary (1 mile north-east), Kilmuir (1 mile south-west), Barbaraville (2 miles south-west), Arabella (3 miles north-east) and Nigg (3 miles south-east). We also work in nearby towns such as Nairn (13 miles south-east), Tain (5 miles north), Alness (7 miles south-west), Dornoch (10 miles north), Invergordon (5 miles south-west) and Fortrose (11 miles south). Remote and island addresses take a little more planning, so call us to arrange it.

Landmarks near Milton

We visit homes around Church. The closest station to Milton is Fearn station, roughly 4 miles north-east. Other landmarks nearby include County Community Hospital (4.2 miles south-west) and Milntown Castle (0.6 miles south-east).

Map of Milton © OpenStreetMap contributors

Repair or replace: which is better?

Replacing the frame or sill is a much bigger job, and it may not match the rest after years of weathering. Repairing the damage keeps the original. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Why us?

  • No need to remove anything
  • Honest advice, even when it means no job
  • Work done at your home or business
  • Free fixed quotes from pictures

Take a look at our prices page.

How we price uPVC repair

Repairs from £95. We give every job a fixed price from photos. This is what makes a difference:

  • Where the damage is and how we get to it
  • The material
  • How many items we do on one visit
  • Whether old repairs or coatings need taking off

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Quotes from your pictures

You can take the photos on your phone, there is no need for anything special. Make sure they show:

  • Any details about the material
  • A coin beside the damage so we can judge size
  • The postcode, so we can plan the visit
  • A clear, close picture of the problem area

Email us photos of the damage and one of the entire item, with your IV18 postcode, and we’ll come back with a fixed quote.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

When to call us in Milton

uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and removed fittings leave holes.

It’s worth getting a quote if you see:

  • Burns on sills
  • Holes from removed fittings and alarms
  • Damage during building work
  • Scratches from ladders and furniture

What to look for in a quote

  • How the room is protected while they work
  • If travel is included in the price
  • Whether the colour is mixed to match
  • How changes to the job are handled

How to compare quotes

FAQs for Milton

Can you redo someone else’s repair?

In most cases. The old repair comes out first.

Do you charge for travel?

There’s no separate call-out charge. Your fixed quote includes everything.

Do you cover the whole of Highland?

Everywhere in the UK, Milton included. Travel is included in the price.

Do you work in Milton?

Yes. We work across the UK and travel to Milton and the rest of Highland. Send us pictures for a fixed quote, or call 0345 017 0787.

What if the damage is worse than the pictures show?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

Is there any odour?

It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.

What happens once I’ve sent photos?

We review the photos and send a fixed quote.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

How it works

On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a morning or an afternoon, tidy-up included.

  1. We clean the frame or panel.
  2. Next we fill the damage.
  3. We sand the repair smooth.
  4. We colour-match the finish, including woodgrain effects.
  5. We blend the repair into the surrounding surface.

How to prepare

  • Keep a parking space free if you can
  • Have a window or extractor fan available
  • Ensure the area is dry

Getting a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.

Send pictures for a quote

Related advice

Honest limits

We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send photos and we will give you a straight answer.

Materials we repair

  • Coloured and woodgrain uPVC
  • Conservatory frames
  • Window frames & sills
  • Doors & door panels
  • White uPVC
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.