Derby · England

uPVC window & door repair in Oakwood, Derby

uPVC repair for Oakwood, without a refit. Get a fixed price from your pictures, then we come to you.

  • Repairs from £95
  • Damage during building work
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair near Oakwood

Prices and what affects them

Repairs from £95. We price every job individually. What matters most is:

  • The colour and finish to match
  • How easy the damage is to reach
  • The material and finish
  • The type of damage

A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.

How to get a fixed quote

Before you send pictures, these tips help us give you a firm price:

  • Natural light rather than flash
  • Any details about the material
  • A clear, close picture of the problem area
  • Where you are, by postcode

Upload a picture of the damage and one of the whole item, with your DE21 postcode, and we will reply with a fixed quote.

uPVC repair in Oakwood, done in place

We fill and refinish the damage so it blends into the frame, including woodgrain finishes. We also do snagging repairs for builders. We work on coloured and woodgrain uPVC, white uPVC and window frames & sills, and the jobs we see most are damage during building work and holes from removed fittings and alarms.

You get a one-year guarantee, the same in Oakwood as everywhere else we work. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Area
Oakwood (DE21)
Area hub
Derby
Cover
One year on every repair
Quote
From £95. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped white edge filled and refinished

Work for landlords and builders

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Landlords, letting agents and housing providers in Oakwood use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

What a repair can’t fix

Some jobs are not right for a repair, including:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Conservatory frames
  • White uPVC
  • Window frames & sills
  • Doors & door panels
  • Coloured and woodgrain uPVC

Oakwood: your questions answered

Can you repair a burn on a uPVC sill?

Yes. We fill and refinish the burnt area to match.

What happens next?

You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Is there a call-out fee?

There is no separate call-out charge. The fixed price covers the visit and the work.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

It’s been repaired before. Can you still fix it?

Yes, we often do. It can add a little time, which we include in the quote.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Do you come to Oakwood?

Yes. We cover the whole UK and travel to Oakwood. Send us pictures for a fixed quote, or call 0345 017 0787.

Covering Oakwood

Oakwood is about 3 miles north-east of Derby, in Derby. Anywhere in DE21, we come to you. Oakwood is one of 31 places in Derby where we work. Our jobs stretch from Oakwood to Birmingham (38 miles away).

Jobs in DE21 work the same way as everywhere else we cover. We regularly work on streets such as Lime Lane, Morley Road and Dukeries Lane. Nearby, we also work in Breadsall (1 mile north-west), Morleymoor (2 miles north), Morley Smithy (2 miles north), Spondon (2 miles south-east) and Little Chester (2 miles south-west). Larger places within reach include Derby (3 miles south-west), Shelton Lock (5 miles south), Cathedral Quarter (3 miles south-west), New Zealand (4 miles south-west), Sunny Hill (5 miles south-west) and Pear Tree (4 miles south-west). Oakwood is among the bigger towns we cover in Derby.

Landmarks near Oakwood

We visit homes around The Church On Oakwood, Tuition Services Co Brookside School and Parkview Primary School. Oakwood’s nearest station is Spondon station, about 2.3 miles south. Further afield, we also cover the area around Derbion (2.7 miles south-west) and Royal Crown Derby Museum (3 miles south-west).

Map of Oakwood © OpenStreetMap contributors

Can I fix it myself?

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

What we do, step by step

We turn up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a morning or an afternoon, and the room is left clean and tidy.

  1. First the frame or panel is cleaned.
  2. Next we fill the damage.
  3. We sand the repair smooth.
  4. We match the colour, including woodgrain finishes.
  5. The repair is blended into the surface around it.

Before we arrive

  • Keep children and pets away from the room on the day
  • Tell us about any previous repairs or coatings
  • Keep a parking space free if you can

How to get a price

There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Get a free quote

Read more

Common problems we fix in Oakwood

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and old fittings leave holes.

People usually call us when they notice one of these:

  • Burns on sills
  • Damage during building work
  • Scratches from ladders and furniture
  • Chips and dents

What to look for in a quote

  • What preparation is included
  • Who turns up on the day
  • How long the guarantee is and what it covers
  • How changes to the job are handled

Our hiring checklist

Repair or replace in Oakwood?

A new window, door or sill costs far more, and it may not match the rest after years of weathering. A repair leaves the unit in place. Our uPVC repair starts from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor in Oakwood

  • Dust sheets down, tidy finish
  • Nothing taken out or refitted
  • We come to you, anywhere in the UK
  • Straight answers about what a repair can do

Read our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.