Blaenau Gwent · Wales

uPVC Repair in Rassau

uPVC repair for Rassau, without a refit. Send us photos for a fixed quote, then book a visit.

  • Repairs from £95
  • Holes from removed fittings and alarms
  • Scratches from ladders and furniture
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair near Rassau

What we can’t put right

A repair is not always the answer, and we’d rather say so up front. We can’t fix:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • White uPVC
  • Coloured and woodgrain uPVC
  • Conservatory frames
  • Doors & door panels
  • Window frames & sills

uPVC repair in Rassau, done in place

The damage is filled and refinished so it blends into the frame, including woodgrain finishes. Builders and developers use us for snagging repairs too. Our technicians work on doors & door panels, white uPVC and coloured and woodgrain uPVC, and the jobs we see most are holes from removed fittings and alarms and damage during building work.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right. Warm soapy water and a soft cloth are all it needs. Don’t use solvents or scourers.

Damaged white panel edge repaired, before and after
Location
Rassau (NP23)
Area hub
Blaenau Gwent
Cover
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

How we price uPVC repair

Repairs from £95. Every quote is fixed and free. What we look at:

  • Doing more than one item at once
  • Previous DIY repairs that have to come out
  • The type of damage
  • What the surface is made of

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Send photos for a quote

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • The postcode, so we can plan the visit
  • A clear, close picture of the problem area
  • Good light, ideally daylight, without flash glare
  • The material, if you know it

A quote takes minutes to ask for: take one close-up and one wider shot of the window, door or sill, add your postcode and send them over. What comes back is a fixed price, not a guess.

Repairing versus replacing in Rassau

A new window, door or sill costs far more, and new uPVC may not match the weathered frames around it. A repair keeps the original. Our uPVC repair starts from £95. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.

Why book with us

  • Repair technicians who travel to you, UK-wide
  • Colour mixed on the day to match
  • CHAS, Constructionline and SafeContractor accredited
  • Fixed prices from your photos

Take a look at our prices page.

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

For anyone letting property in or around Rassau, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.

How the visit works

We agree an arrival time beforehand, so you are not left guessing. On site, it takes a few hours for most jobs. We leave the room clean.

  1. We clean the frame or panel.
  2. Scratches, chips and holes are filled.
  3. The repair is sanded smooth.
  4. We match the colour, including woodgrain finishes.
  5. Finally we blend it into the rest of the frame.

How to prepare

  • Open a window if you can
  • Clear toiletries, mats and anything else from around the area
  • Make sure the area is dry

Get a quote

There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a fixed quote

Related advice

Rassau questions

What areas do you cover?

We work UK-wide. Prices don’t change with location.

Can you price it without visiting?

Normally, yes. Clear pictures let us give you a fixed quote without visiting.

Do you come to Rassau?

We do. We send a technician to Rassau for every job, and the price is the same as everywhere else.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you repair a burn on a uPVC sill?

Yes. The burn is filled and refinished to match.

Can I add another job to the visit?

Of course, and it usually saves money. Just add the extra items to your pictures and we will quote them together.

Can you repair something that is been repaired before?

Generally, yes. Let us know what was used before and we will plan for it.

When to call us in Rassau

uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and removed fittings leave holes.

If you can see any of these, send us a picture:

  • Damage during building work
  • Burns on sills
  • Scratches from ladders and furniture
  • Holes from removed fittings and alarms

What to look for in a quote

  • Who will actually do the work
  • A fixed price, and whether VAT is included
  • How your room will be protected
  • When it can be used again

Our hiring checklist

Covering Rassau

Rassau is about 1 mile north-west of Ebbw Vale, in Blaenau Gwent. Whether you’re in the middle of Rassau or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 56 places in Blaenau Gwent. We work right across the region, from Rassau to Birmingham (about 73 miles away).

Every address in NP23 is covered, from the main roads to the quietest streets. That includes homes on Howy Road, Rassau Road and School Road. Being close to the A465 and A4047, Rassau is simple for us to get to. Neighbouring places we cover include Garnlydan (1 mile north-east), Trefil (2 miles west), Llangynidr (5 miles north), Cyffredyn (5 miles north) and Cwm Crawnon (5 miles north). Further out, we also cover Abertillery (6 miles south-east), Blaenau Gwent (6 miles south-east), Penrhiwgarreg (6 miles south-east), Pen-y-bont (6 miles south-east), Rhymney (4 miles south-west) and Llanhilleth (8 miles south-east). As one of the bigger places in Blaenau Gwent, Rassau is somewhere we visit frequently.

Local landmarks in Rassau

Around Rassau, we work in homes near Market Hall Cinema, Tafarn Y Werin pub and Rhos y Fedwen Primary, among other places. Rassau’s nearest station is Ebbw Vale Town station, roughly 1.8 miles south-east of the centre. Well-known places in the area include Ebbw Vale Works Museum (1.8 miles south-east) and Festival Park (3.8 miles south). Open spaces near Rassau include Bryn-serth and Glyncoed Lake.

Map of Rassau © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.