Kent · England
uPVC window & door repair in Richborough Port, Kent
Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for householders, landlords and businesses in Richborough Port. Free, fixed quotes from your pictures.
- Repairs from £95
- Scratches from ladders and furniture
- Holes from removed fittings and alarms
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
If in doubt, send photos and we will say what we think.
Materials we repair
- Window frames & sills
- Conservatory frames
- Coloured and woodgrain uPVC
- Doors & door panels
- White uPVC
uPVC repair in Richborough Port without replacing anything
The damage is filled and refinished so it blends into the frame, including woodgrain finishes. Builders and developers use us for snagging repairs too. Typical jobs include damage during building work and chips and dents, in white uPVC, coloured and woodgrain uPVC and conservatory frames.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking. Clean with warm soapy water and a soft cloth. Do not use solvents or scourers.
- Location
- Richborough Port (CT13)
- County
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price uPVC repair
Prices start from £95. You’ll know the full cost before booking. We take into account:
- Access to the area
- What the surface is made of
- Whether old repairs or coatings need taking off
- How hard the colour is to match
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what helps:
- Daylight if possible, and no flash reflection
- A wider photo showing the entire window, door or sill
- A clear, close picture of the problem area
- Where you are, by postcode
Upload a picture of the damage and a wider shot of the whole item, with your CT13 postcode, and we will come back with a fixed quote.
What we do, step by step
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a few hours. We tidy up before we leave and tell you when it’s ready to use.
- First the frame or panel is cleaned.
- Scratches, chips and holes are filled.
- We smooth the repair.
- The finish is colour matched, woodgrain included.
- We blend the repair into the surrounding surface.
Getting ready for the visit
- Let us know if it has been repaired before
- Tell us about parking, stairs or access
- Let us know which floor the room is on
Getting a price
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Read more
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We work for landlords, letting agents and housing providers in Richborough Port as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Signs you need uPVC repair in Richborough Port
uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and old fittings leave holes.
Send us a picture if you notice any of these:
- Burns on sills
- Holes from removed fittings and alarms
- Chips and dents
- Scratches from ladders and furniture
What to look for in a quote
- Whether there are any call-out or travel charges
- Who will actually do the work
- Whether the price is fixed and includes VAT
- Whether the colour is mixed to match
Places near Richborough Port
What else we do in Richborough Port
FAQs for Richborough Port
Can you repair a burn on a uPVC sill?
Yes. We fill and refinish the burnt area to match.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Which areas do you work in?
Everywhere in the UK, Richborough Port included. There is no extra charge for travel.
Can you match woodgrain uPVC?
Yes. Colour and grain are matched by hand.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Covering Richborough Port
Richborough Port is about 4 miles south-west of Ramsgate, in Kent. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. Richborough Port is one of 922 towns and villages in Kent we cover. We work right across the region, from Richborough Port to London (64 miles away).
Every address in CT13 is covered, from the main roads to the quietest streets. If you’re just outside Richborough Port, we cover Ebbsfleet (1 mile north), Sevenscore (2 miles north), Cliffs End (2 miles north-east), Way (2 miles north) and Pegwell (2 miles north-east). We also work in nearby towns such as Canterbury (12 miles west), Margate (5 miles north), Dover (12 miles south), Ramsgate (4 miles north-east), Broadstairs (5 miles north-east) and Whitstable (14 miles west).
Around Richborough Port
Around Richborough Port, we work in homes near Sir Roger Manwood's School and Sandwich and Pegwell Bay, among other places. The nearest railway station is Thanet Parkway station, roughly 1.8 miles north of the centre. A little further out are Ramsgate General Hospital (3.2 miles north-east) and White Mill (2.1 miles south-west). Green spaces nearby include Sandwich and Pegwell Bay.
Repair or replace: which is better?
A new window, door or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair keeps the original. Prices start from £95. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Generally one visit, start to finish
- One-year guarantee on every repair
- Colour-matched on site
Take a look at our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
