Gloucestershire · England

uPVC window & door repair in Ripple, Gloucestershire

Damaged window, door or sill in Ripple? We repair it in place, match it on site and guarantee the work for a year.

  • Repairs from £95
  • Chips and dents
  • Scratches from ladders and furniture
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in Ripple

uPVC repair in Ripple, done in place

The damage is filled and refinished so it blends into the frame, woodgrain finishes included. We also do snagging repairs for builders. Typical jobs include holes from removed fittings and alarms and chips and dents, across coloured and woodgrain uPVC, conservatory frames and doors & door panels.

Your repair is guaranteed for a year, as with every job we do. Clean with warm soapy water and a soft cloth. Don’t use solvents or scourers.

Damaged white panel edge repaired, before and after
Location
Ripple (GL20)
Area hub
Gloucestershire
Guarantee
A year, on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

What we do, step by step

We agree an arrival time beforehand. On site, it takes a morning or an afternoon for most jobs. We leave the room clean and you’ll know when it can be used.

  1. First the frame or panel is cleaned.
  2. Next we fill the damage.
  3. We sand the repair smooth.
  4. We colour-match the finish, including woodgrain effects.
  5. The repair is blended into the surface around it.

Preparing for the visit

  • Open a window if you can
  • Let the surface dry out before the visit
  • Let us know if it has been repaired before

Getting a price

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed quote

Related advice

Ripple: your questions answered

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Is a repair better than a new one?

Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.

Do you work in Ripple?

We do. We send a technician to Ripple for every job, with no extra charge for travel.

What happens next?

We come back with a fixed quote, usually with dates to choose from. You’re under no obligation.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

Can you match woodgrain uPVC?

Yes. Colour and grain are matched by hand.

What do you need from me?

Photos of the damage, a picture of the whole window, door or sill and your postcode. After that, we just agree a date.

For landlords and businesses

If you manage property in Ripple, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Prices and what affects them

Prices start from £95. Prices are worked out job by job, from your pictures. The main factors are:

  • Access to the area
  • Any earlier repairs that need removing first
  • The colour and finish to match
  • What kind of damage it is

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

How to get a fixed quote

It only takes a minute to photograph the damage. Please include:

  • Whether it’s been repaired or coated before
  • One sharp close-up of the damage
  • A wider photo showing the whole window, door or sill
  • Daylight if possible, and no flash reflection

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you’re under no obligation.

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

Why repair rather than replace?

A new window, door or sill costs far more, and new uPVC may not match the weathered frames around it. A repair keeps the original. Prices start from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.

What you get with us

  • Straight answers about what a repair can do
  • CHAS and Constructionline accredited
  • Normally one visit, start to finish
  • Everything repaired in place

Read our full price list.

What we’re called out for in Ripple

uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and removed fittings leave holes.

The most common problems we’re called about are:

  • Burns on sills
  • Scratches from ladders and furniture
  • Chips and dents
  • Damage during building work

What your quote should include

  • Whether the price is fixed and includes VAT
  • How long it needs to cure
  • How changes to the job are handled
  • How the colour is matched

10 questions to ask before booking

What we can’t put right

A repair isn’t right for every job, including:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Window frames & sills
  • White uPVC
  • Conservatory frames
  • Doors & door panels
  • Coloured and woodgrain uPVC

About Ripple

Ripple is about 4 miles north-west of Tewkesbury, in Gloucestershire. Jobs in Ripple are booked in like any other job: a fixed price from your photos, then a visit to do the work. Our repair technicians cover 470 places in Gloucestershire, from the larger towns to small villages. Our jobs stretch from Ripple to Birmingham (32 miles away).

Our visits in GL20 are booked in the same way as anywhere else. You’ll find streets such as Bow Lane and Ferry Lane, and we cover them all. Other places close to Ripple include Uckinghall (1 mile west), Puckrup (1 mile south-east), Naunton (1 mile north), Green Street (2 miles north) and Church End (2 miles south-east). Larger places within reach include Cheltenham (11 miles south-east), Gloucester (13 miles south), Tewkesbury (4 miles south-east), St Paul's (11 miles south-east), Lansdown (11 miles south-east) and Bishop's Cleeve (8 miles south-east).

Near you in Ripple

Locally, our jobs take us to homes close to Bredon School, Church of St Mary and The Railway Inn. The closest station to Ripple is Ashchurch for Tewkesbury station, roughly 4.2 miles south-east. Well-known places in the area include Tewkesbury Heritage & Visitor Centre (3.4 miles south). Green spaces nearby include Kemerton Lake and Brotheridge Green Nature Reserve.

Map of Ripple © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.