Birmingham · England
uPVC Repair for Rubery homes
Scratch, chip, burn and hole repairs to uPVC windows, doors and sills at your home in Rubery, with a one-year guarantee on every repair.
- Repairs from £95
- Chips and dents
- Holes from removed fittings and alarms
What we cannot put right
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- White uPVC
- Coloured and woodgrain uPVC
- Window frames & sills
- Doors & door panels
- Conservatory frames
uPVC repair in Rubery without replacing anything
Builders and developers use us for snagging repairs too. We fill and refinish the damage to match the frame, including woodgrain finishes. Typical jobs include burns on sills and scratches from ladders and furniture, in white uPVC, coloured and woodgrain uPVC and conservatory frames.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it. Clean with warm soapy water and a soft cloth. Do not use solvents or scourers.
- Area
- Rubery (B45)
- Region
- Birmingham
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Rubery
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
If you manage property in Rubery, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
Rubery and nearby
Rubery is about 4 miles north of Bromsgrove, in Birmingham. Whether you are in the middle of Rubery or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Rubery is one of 140 places in Birmingham where we work. Our nearest city page is Birmingham, about 8 miles away.
We cover every part of the B45 postcode area. Streets in the area include New Road, Maple Road and Hazel Road. Close by, we cover Lickey Hills (1 mile south-east), Rednal (1 mile east), Lydiate Ash (1 mile south-west), Lickey (1 mile south) and Chapman's Hill (1 mile north-west). We also work in nearby towns such as Birmingham (8 miles north-east), Royal Sutton Coldfield (15 miles north-east), Erdington (12 miles north-east), Lee Bank (8 miles north-east), Cape Hill (7 miles north) and Streetly (14 miles north-east).
Near you in Rubery
Around Rubery, we work in homes near Lickey Hills Country Park, Colmers School and St Chad's Church. Also close by are Beaconside Primary and Nursery School (less than half a mile north-west) and Waseley Hills High School (under half a mile north-west). Rubery’s nearest station is Longbridge station, roughly 1.8 miles east. Well-known places in the area include Castlebourne folly (2.6 miles west) and Rubery Hill Hospital (0.7 miles north-east). The countryside around Rubery includes Bilberry Hill and Chaddesley Woods National Nature Reserve.
Do you need uPVC repair in Rubery?
uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and removed fittings leave holes.
The things customers usually mention when they call are:
- Damage during building work
- Burns on sills
- Scratches from ladders and furniture
- Holes from removed fittings and alarms
Questions to ask before booking
- Whether a trained technician does the job
- How to look after the finish
- How soon you can use it again
- Whether they match the colour on site
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
FAQs for Rubery
Can you repair a burn on a uPVC sill?
Yes. The burn is filled and refinished to match.
Will the price change on the day?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Is a repair better than a new one?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Repair or replace: which is better?
Replacing the frame or sill is a much bigger job, and it may not match the rest after years of weathering. A repair leaves the unit in place. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Rubery clients choose us
- No need to remove anything
- Rooms protected and left tidy
- Most jobs done in one visit
- No extra charge for your area
Take a look at our pricing.
What else we do in Rubery
Prices and what affects them
Repairs from £95. We do not charge extra for travel to Rubery. The price comes down to:
- Any earlier repairs that need removing first
- The size and number of damaged areas
- How many items we do on one visit
- Where the damage is and how we get to it
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
You can take the pictures on your phone, there is no need for anything special. Just make sure we can see:
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- A photo taken from further back
- What it’s made of, if you know
Most clients in Rubery get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
How the visit works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- First the frame or panel is cleaned.
- We fill scratches, chips and holes.
- The repair is sanded smooth.
- We colour-match the finish, including woodgrain effects.
- We blend the repair into the surrounding surface.
Getting ready for the visit
- Keep a parking space free if you can
- Have a window or extractor fan available
- Let the surface dry out before the visit
Ask for a price
The quickest way to a price is to send two or three pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
