Shropshire · England

uPVC window & door repair in Selattyn, Shropshire

uPVC repair in and around Selattyn: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Holes from removed fittings and alarms
  • Chips and dents
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair near Selattyn

What uPVC repair costs

Prices start from £95. Each job gets its own fixed price. This is what makes a difference:

  • Previous DIY repairs that have to come out
  • How many areas need work
  • What the surface is made of
  • Where the damage is and how we get to it

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Quotes from your pictures

Two or three clear pictures are usually enough. Try to include:

  • Any details about the material
  • Natural light rather than flash
  • A coin beside the damage so we can judge size
  • One picture of the whole window, door or sill

For a price in Selattyn, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

uPVC repair in Selattyn without replacing anything

Builders and developers use us for snagging repairs too. We fill and refinish the damage to match the frame, woodgrain finishes included. If you are dealing with burns on sills and damage during building work, we can help, whatever the material.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it. Clean with warm soapy water and a soft cloth. Don’t use solvents or scourers.

Where
Selattyn (SY10)
County
Shropshire
Guarantee
12 months on all our work
Quote
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
White panel with a damaged edge, shown before and after repair

Selattyn: your questions answered

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

What happens next?

You will get a fixed quote back, generally with dates to choose from. You’re under no obligation.

Can landlords book you?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

Will there be a smell?

It depends on the job, but often a little. Open windows and an extractor fan help.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.

Can you repair several things at once?

Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.

When to call us in Selattyn

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and removed fittings leave holes.

Typical reasons for a call-out include:

  • Holes from removed fittings and alarms
  • Damage during building work
  • Burns on sills
  • Scratches from ladders and furniture

What to look for in a quote

  • Whether the price covers travel
  • Whether they match the colour on site
  • Aftercare advice
  • When it can be used again

10 questions to ask before you book

Honest limits

We will not take on work that won’t last, so these are the limits:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us photos and we will tell you honestly.

Materials we repair

  • White uPVC
  • Doors & door panels
  • Window frames & sills
  • Coloured and woodgrain uPVC
  • Conservatory frames

Work for landlords and builders

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Covering Selattyn

Selattyn is about 3 miles north-west of Oswestry, in Shropshire. Wherever you are in the SY10 postcode area, we carry out the work at your property. Selattyn is one of 433 towns and villages in Shropshire we cover. You can also see our page for Liverpool, about 36 miles away.

Every address in SY10 is covered. Main roads around Selattyn include the B4579, which makes travel easy. Neighbouring places we cover include Gobowen (2 miles east), Park Hall (3 miles south-east), Oswestry (3 miles south-east), Weston (4 miles south-east) and Whittington (4 miles south-east). Further out, we also cover Wem (15 miles east), Ellesmere (8 miles east), St Martins (4 miles north-east), Baschurch (12 miles south-east), Bomere Heath (15 miles south-east) and West Felton (7 miles south-east).

What’s near Selattyn

Around Selattyn, we work in homes near Church of St Mary and Selattyn CofE Primary School and the streets around them. For rail, the closest station is Gobowen station, roughly 2.1 miles east of the centre. Nearby you’ll also find Chirk Castle Museum (2.6 miles north) and Robert Jones and Agnes Hunt Orthopaedic Hospital (2.4 miles east). Open spaces near Selattyn include Plas-crogen Wood.

  • Other local spots include Municipal Borough of Oswestry (2.8 miles south-east)
Map of Selattyn © OpenStreetMap contributors

Repair or replace: which is better?

A new window, door or sill costs far more, and new uPVC may not match the weathered frames around it. A repair keeps the original. Prices start from £95. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

What you get with us

  • Colours mixed by hand to suit your surface
  • Technicians who travel to you, UK-wide
  • Normally one visit, start to finish
  • We leave the room as we found it

See our pricing.

How the visit works

Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for a few hours from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.

  1. First the frame or panel is cleaned.
  2. We fill scratches, chips and holes.
  3. We smooth the repair.
  4. We match the colour, including woodgrain finishes.
  5. We blend the repair into the surrounding surface.

Before we arrive

  • Have a window or extractor fan available
  • Ensure the area is dry
  • Move bottles, mats and clutter away from the area

How to get a price

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Send pictures for a quote

Advice

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.