Wrexham · Wales
uPVC Repair for Stansty homes
Damaged window, door or sill in Stansty? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Chips and dents
- Scratches from ladders and furniture
uPVC repair in Stansty without replacing anything
The damage is filled and refinished so it blends into the frame, including woodgrain finishes. We also do snagging repairs for builders. We regularly repair doors & door panels, window frames & sills and coloured and woodgrain uPVC, and people most frequently call us about damage during building work and chips and dents.
You get a one-year guarantee, the same in Stansty as everywhere else we work. Clean with warm soapy water and a soft cloth. Don’t use solvents or scourers.
- Area
- Stansty (LL11, LL13)
- Area hub
- Wrexham
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need uPVC repair in Stansty
uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and old fittings leave holes.
Keep an eye out for any of the following:
- Burns on sills
- Holes from removed fittings and alarms
- Chips and dents
- Damage during building work
What to look for in a quote
- What prep work is covered
- If travel is included in the price
- Who turns up on the day
- How long the guarantee is and what it covers
When a repair isn’t the answer
Some jobs aren’t right for a repair, for example:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Stansty
- Coloured and woodgrain uPVC
- Conservatory frames
- Window frames & sills
- White uPVC
- Doors & door panels
Prices and what affects them
Prices start from £95. We give every job a fixed quote from photos. These are the things that affect it:
- How hard the colour is to match
- Access to the area
- What the surface is made of
- The type of damage
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed quote
You can typically get a fixed quote without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- One picture of the entire window, door or sill
- The material, if you know it
- Where you are, by postcode
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Landlord and trade work in Stansty
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Stansty as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
FAQs for Stansty
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Can you match woodgrain uPVC?
Yes. We recreate the colour and grain by hand.
Do you come to Stansty?
We do. Technicians travel to Stansty from across the region, with no extra charge for travel.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
How much does uPVC repair cost in Stansty?
Repairs from £95. Because every job differs, we price from photos. You will get a fixed figure before you book.
Stansty and nearby
Stansty is about 1 mile north-west of Rhosddu, in Wrexham. Whether you are in the middle of Stansty or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Stansty is one of 115 places in Wrexham we cover. Our nearest city page is Liverpool, about 24 miles away.
Our visits in LL11 and LL13 are booked in the same way as anywhere else. Local streets include Berse Road, Colliery Road and Plas Coch Road, all of which we cover. Main roads around Stansty include the A483, which makes travel easy. If you’re just outside Stansty, we cover Plas Coch (1 mile south-east), Highfield (1 mile north-west), New Broughton (1 mile west), Rhosrobin (1 mile north) and Old Rhosrobin (1 mile north-east). Within a short drive, we also cover Rhosllannerchrugog (4 miles south-west), Pentredŵr (4 miles south-west), Llay (3 miles north), Pant (4 miles south-west), Gresford (3 miles north-east) and Johnstown (4 miles south).
Local landmarks in Stansty
Typical jobs here are in homes near Grove Park School, Bellevue Park and Ysgol Clywedog and the streets around them. Nearby too are Berse Drelincourt Church (0.5 miles south-west), Plas Coch pub (under half a mile south-east) and Rhosddu Primary School (0.7 miles east). The closest station to Stansty is Wrexham General station, about 0.7 miles south-east. Well-known places in the area include Tŷ Pawb (1.2 miles south-east) and Cae Twmpath Fieldname 2 (1.7 miles west). For a walk, there’s Pant-yr-ochain Big Pool and Cefn.
Repair or replace in Stansty?
A new window, door or sill costs far more, and it may not match the rest after years of weathering. A repair keeps the original. Our uPVC repair starts from £95. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why Stansty customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- Typically one visit, start to finish
- We leave the room as we found it
Take a look at our prices page.
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which usually takes a morning or an afternoon. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First the frame or panel is cleaned.
- Next we fill the damage.
- The repair is sanded smooth.
- We colour-match the finish, including woodgrain effects.
- We blend the repair into the surrounding surface.
Preparing for the visit
- Clear the area around the damage
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the window, door or sill, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Also in Stansty
About our accreditations · Every repair comes with a one-year guarantee.
