Hampshire · England

uPVC window & door repair in Stanswood, Hampshire

uPVC repair for Stanswood, without a refit. Get a fixed quote from your photos, then we come to you.

  • Repairs from £95
  • Holes from removed fittings and alarms
  • Chips and dents
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in Stanswood

Repairing versus replacing in Stanswood

A new window, door or sill is a much bigger job, and it may not match the rest after years of weathering. A repair leaves the unit in place. Prices start from £95. Our prices are the same across the UK, so there is no premium for Stanswood. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why us?

  • Every repair guaranteed for a year
  • Colour-matched on site
  • Straight answers about what a repair can do
  • No need to remove anything

Read our pricing.

uPVC repair at your home in Stanswood

We fill and refinish the damage to match the frame, woodgrain finishes included. We also do snagging repairs for builders. We regularly repair doors & door panels, coloured and woodgrain uPVC and white uPVC, and common reasons people contact us are chips and dents and holes from removed fittings and alarms.

All our work comes with a one-year guarantee, wherever you are in Hampshire. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Area
Stanswood (SO45)
Area hub
Hampshire
Warranty
One year on every repair
Quotes
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Before and after: a chipped white edge filled and refinished

Covering Stanswood

Stanswood is about 3 miles north-west of Cowes, in Hampshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 683 towns and villages across Hampshire. Our jobs stretch from Stanswood to London (72 miles away).

Here we cover the SO45 postcode area. Other places close to Stanswood include Sprat's Down (1 mile north), Calshot (1 mile north-east), Hillhead (1 mile north-east), Langley (1 mile west) and Blackfield (2 miles north-west). Within a short drive, we also cover Gosport (8 miles east), Eastleigh (11 miles north), Fareham (7 miles north-east), Totton (11 miles north-west), Chandler's Ford (13 miles north) and Hedge End (8 miles north).

What’s near Stanswood

Around Stanswood, we work in homes near St George. For rail, the closest station is Hamble station, about 4.8 miles north. Further afield, we also cover the area around Coldeast (5.4 miles north-east) and Calshot Castle (2 miles north-east). Not far away are Mill Hill and Mercury Marshes.

Map of Stanswood © OpenStreetMap contributors

Stanswood: your questions answered

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

When can you do it?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

Do you cover Stanswood?

Yes, we do. We send a technician to Stanswood for every job, with no extra charge for travel.

What happens next?

We come back with a fixed quote, plus dates. There’s no obligation to book.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

How do I book?

Some pictures, your postcode and how to reach you. On the day, access to the room.

How we price uPVC repair

Prices start from £95. We don’t charge extra for travel to Stanswood. The price depends on:

  • The type of damage
  • Where the damage is and how we get to it
  • Unusual colours or finishes
  • Previous DIY repairs that have to come out

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

How to get a fixed quote

Most quotes are done from pictures alone. To make it quick:

  • What it’s made of, if you know
  • Natural light rather than flash
  • A close-up of the damage, in focus
  • A coin beside the damage so we can judge size

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you’re under no obligation.

What we cannot put right

We won’t take on work that won’t last, so here’s what a repair can’t put right:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send pictures and we’ll give you a straight answer.

Surfaces we repair

  • White uPVC
  • Coloured and woodgrain uPVC
  • Conservatory frames
  • Window frames & sills
  • Doors & door panels

Should I try a DIY kit first?

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Common problems we fix in Stanswood

uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and removed fittings leave holes.

If you can see any of these, send us a photo:

  • Damage during building work
  • Scratches from ladders and furniture
  • Holes from removed fittings and alarms
  • Chips and dents

What your quote should include

  • Whether cleaning and preparation are in the price
  • How the colour is matched
  • A fixed quote, and whether VAT is included
  • The length of the guarantee and what it covers

Our hiring checklist

The process

Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a few hours from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We start by cleaning the frame.
  2. Scratches, chips and holes are filled.
  3. We sand the repair smooth.
  4. We colour-match the finish, including woodgrain effects.
  5. The repair is blended into the surface around it.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Tell us about parking, stairs or access
  • Point us to the nearest place to park

Getting a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a fixed quote

Read more

Landlords, agents and businesses in Stanswood

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.