Kent · England

uPVC window & door repair in Strood, Kent

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills at your home in Strood, with a one-year guarantee on every repair.

  • Repairs from £95
  • Damage during building work
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in Strood

How we handle uPVC repair in Strood

We fill and refinish the damage so it blends into the frame, including woodgrain finishes. We also do snagging repairs for builders. Whether it’s damage during building work and chips and dents, we can usually put it right.

Your repair is guaranteed for a year, as with every job we do. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Location
Strood (TN17)
Area hub
Kent
Cover
A year, on every repair
Quotes
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026
White panel with a damaged edge, shown before and after repair

Strood: your questions answered

Are there extra charges for Strood?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

Is repairing better than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

What information do you need?

Just pictures, your postcode and a contact number. On the day, access to the room.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

Will the price change on the day?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

How quickly can you book me in?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

Honest limits

We would rather lose a job than do one that will not last, so these are the limits:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us pictures and we will tell you honestly before booking.

What we work on

  • Conservatory frames
  • White uPVC
  • Coloured and woodgrain uPVC
  • Doors & door panels
  • Window frames & sills

What uPVC repair costs

Repairs from £95. Prices are worked out job by job. The main factors are:

  • How hard the colour is to match
  • What the surface is made of
  • Any earlier repairs that need removing first
  • How much damage there is

We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your photos

Good pictures mean an accurate price. Here’s what helps:

  • One picture of the entire window, door or sill
  • Details of any past repairs
  • Where you are, by postcode
  • One sharp close-up of the damage

For a price in Strood, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Landlords, agents and businesses in Strood

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

For anyone letting property in or around Strood, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

Where we work around Strood

Strood is about 11 miles south-west of Ashford, in Kent. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in all 922 towns and villages across Kent. You can also see our page for London, about 44 miles away.

Jobs in TN17 work the same way as everywhere else we cover. From Rolvenden Hill and Tenterden Road or a nearby road, a technician can come to you. Close by, we cover Rolvenden (1 mile south-west), Rolvenden Layne (1 mile south), West Cross (1 mile west), Parkgate (2 miles north) and Broad Tenterden (2 miles east). Further out, we also cover Maidstone (15 miles north), Ashford (11 miles north-east), Paddock Wood (14 miles north-west), Bearsted (15 miles north), Park Wood (13 miles north) and Kennington (13 miles north-east).

Around Strood

Around Strood, we work in homes near Turners Field, Homewood School and Sixth Form Centre and Rolvenden Primary School and the streets around them. Other landmarks nearby include The C.M Booth Collection (1 mile south-west) and Benenden Hospital (2.4 miles north-west).

Map of Strood © OpenStreetMap contributors

Repairing versus replacing in Strood

Replacing the frame or sill is a much bigger job, and it may not match the rest after years of weathering. Repairing the damage leaves the unit in place. Prices start from £95. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

Why Strood customers choose us

  • Free fixed quotes from pictures
  • Work done at your home or business
  • One-year guarantee on every repair
  • Honest advice, even when it means no job

Take a look at our full price list.

Common problems we fix in Strood

uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and removed fittings leave holes.

Send us a photo if you notice any of these:

  • Burns on sills
  • Holes from removed fittings and alarms
  • Damage during building work
  • Chips and dents

What to look for in a quote

  • How to care for the finish
  • Who will actually do the work
  • How the colour is matched
  • How your room will be protected

Our hiring checklist

The process

Arrival times are agreed in advance. Once we’re there, the work takes a morning or an afternoon in most cases. We leave the room clean.

  1. First the frame or panel is cleaned.
  2. Next we fill the damage.
  3. We sand the repair smooth.
  4. The finish is colour-matched, woodgrain included.
  5. Finally we blend it into the rest of the frame.

Before we arrive

  • Keep children and pets away from the room on the day
  • Mention if the room is upstairs or in a flat
  • Keep a parking space free if you can

Ask for a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Send photos for a quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.