Flintshire · England

uPVC Repair for Wern-y-gaer homes

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills in Wern-y-gaer, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Damage during building work
  • Scratches from ladders and furniture
Surface Doctor technician repairing a wooden kitchen worktop

Book uPVC repair in Wern-y-gaer

Our work in Wern-y-gaer

Wern-y-gaer is about 3 miles south-west of Flint, in Flintshire. From the centre of Wern-y-gaer to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 139 towns and villages across Flintshire, from the larger towns to small villages. You can also see our page for Liverpool, about 17 miles away.

Our visits in CH7 work the same way as everywhere else we cover. Nearby, we also work in Berth-ddu (1 mile north-east), Rhosesmor (1 mile south-east), Halkyn (1 mile north), Mynydd y Fflint (2 miles east) and Llan-eurgain (2 miles east). Further out, we also cover Connah's Quay (5 miles east), Buckley (5 miles south-east), Bwcle (6 miles south-east), Flint (3 miles north-east), Saltney (11 miles east) and Mold (4 miles south-east).

What’s near Wern-y-gaer

Locally, our jobs take us to homes close to Ysgol Rhos Helyg, The Red Lion Inn and St Paul's Church. For rail, the closest station is Flint station, roughly 3.5 miles north-east of the centre. Further afield, we also cover the area around Mold Community Hospital (3.4 miles south-east) and Moel-y-crio (0.7 miles north-west). Green spaces nearby include Deeside Nature Reserve and Moel y Gaer.

Map of Wern-y-gaer © OpenStreetMap contributors

How we handle uPVC repair in Wern-y-gaer

Builders and developers use us for snagging repairs too. The damage is filled and refinished so it blends into the frame, including woodgrain finishes. If you are dealing with burns on sills and holes from removed fittings and alarms, we can normally put it right.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back. Warm soapy water and a soft cloth are all it needs. Do not use solvents or scourers.

Location
Wern-y-gaer (CH7)
Area hub
Flintshire
Guarantee
A year, on every repair
Price
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Damaged white panel edge repaired, before and after

Prices and what affects them

Repairs from £95. We don’t charge extra for travel to Wern-y-gaer. The price depends on:

  • Where the damage is and how we get to it
  • Doing more than one item at once
  • How much damage there is
  • Unusual colours or finishes

What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.

Quotes from your photos

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus
  • The material, if you know it
  • Something in shot to show the size

Send us pictures of the damage and a wider shot of the whole item, with your CH7 postcode, and we’ll reply with a fixed quote.

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Repair or replace in Wern-y-gaer?

Replacing the frame or sill is a much bigger job, and it may not match the rest after years of weathering. A repair keeps the original. Our uPVC repair starts from £95. The price reflects the work involved, not where you live. You’ll see the full price before you book.

Why book with us

  • Honest advice, even when it means no job
  • Fixed prices from your photos
  • Rooms protected and left tidy
  • No need to remove anything

Read our pricing.

Honest limits

We will always be straight with you, so here’s what a repair will not do:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send photos and we’ll say what we think before you book.

Materials we repair

  • Coloured and woodgrain uPVC
  • Window frames & sills
  • Conservatory frames
  • Doors & door panels
  • White uPVC

Wern-y-gaer: your questions answered

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

How do I get a price for uPVC repair in Wern-y-gaer?

Prices start from £95. Because every job differs, we price from pictures. You will get a fixed figure before you book.

What information do you need?

Use the quote form or ring 0345 017 0787, and we’ll take it from there.

Can a burnt window sill be fixed?

Yes. We fill and refinish the burnt area to match.

What if the damage is worse than the pictures show?

Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.

How soon can you come?

We will give you dates with your quote. Tell us if you need it done quickly.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.

Landlord and trade work in Wern-y-gaer

We are used to working with agents and managing companies. Send the address, photos and access details.

For anyone letting property in or around Wern-y-gaer, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.

How the visit works

We turn up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and the room is left clean and tidy.

  1. First the frame or panel is cleaned.
  2. Next we fill the damage.
  3. We smooth the repair.
  4. We colour-match the finish, including woodgrain effects.
  5. We blend the repair into the surrounding surface.

Preparing for the visit

  • Have a window or extractor fan available
  • Clear the area around the damage
  • Tell us if there are stairs or a lift

Getting a price

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a fixed price

Related advice

Do you need uPVC repair in Wern-y-gaer?

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and old fittings leave holes.

Signs it’s time to call us include:

  • Burns on sills
  • Damage during building work
  • Holes from removed fittings and alarms
  • Chips and dents

What to look for in a quote

  • What aftercare is recommended
  • How soon you can use it again
  • What prep work is covered
  • Is the price fixed, and does it include VAT?

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.