West Lothian · Scotland

uPVC Repair for West Calder homes

We travel to West Calder for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Chips and dents
  • Damage during building work
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in West Calder

FAQs for West Calder

What happens next?

You’ll get a fixed quote back. You’re under no obligation.

How much does uPVC repair cost in West Calder?

Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up and a picture of the whole item with your EH55 postcode.

Is the work guaranteed?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

Which areas do you work in?

The whole UK, including all of West Lothian. Just include your postcode and we’ll offer you dates.

When can you do it?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Can you price it without visiting?

Nearly always. If photos do not show enough, we will ask for another angle.

Can I add another job to the visit?

Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

About our uPVC repair in West Calder

We fill and refinish the damage so it blends into the frame, including woodgrain finishes. Builders and developers use us for snagging repairs too. We’re frequently asked to fix chips and dents and burns on sills, on white uPVC, conservatory frames and window frames & sills.

You get a one-year guarantee, the same in West Calder as everywhere else we work. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

Location
West Calder (EH55)
Region
West Lothian
Warranty
One year on every repair
Price
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026
White panel with a damaged edge, shown before and after repair

Where we work around West Calder

West Calder is about 4 miles south-west of Livingston, in West Lothian. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. West Calder is one of 58 places in West Lothian where we work. Our jobs stretch from West Calder to Edinburgh (16 miles away).

Our technicians cover all of the EH55 postcode area and the streets around it. You’ll find streets such as King Square, Main Street and Station Road, all of which we cover. Neighbouring places we cover include Mossend (1 mile north), Polbeth (1 mile north-east), Seafield (2 miles north), Bellsquarry (2 miles north-east) and Adambrae (2 miles north-east). We also work in nearby towns such as Livingston (4 miles north-east), Bathgate (4 miles north-west), Linlithgow (9 miles north), Whitburn (5 miles west), East Calder (6 miles north-east) and Broxburn (7 miles north-east).

Local landmarks in West Calder

Typical jobs here are in homes near West Calder and the streets around them. West Calder has its own railway station: West Calder station. Further afield, we also cover the area around Almond Valley Heritage Centre (2.6 miles north) and Livingston Designer Outlet (3 miles north-east). For a walk, there is Dechmont Law.

Map of West Calder © OpenStreetMap contributors

What affects the price in West Calder

Prices start from £95. We give every job a fixed price from photos. This is what makes a difference:

  • The type of damage
  • Doing more than one item at once
  • Previous DIY repairs that have to come out
  • How easy the damage is to reach

There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed price

You can take the photos on your phone, there is no need for anything special. Make sure they show:

  • Daylight if possible, and no flash reflection
  • A clear, close picture of the problem area
  • A coin beside the damage so we can judge size
  • Where you are, by postcode

Most customers in West Calder get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Should you replace it?

Replacing the frame or sill costs far more, and new uPVC may not match the weathered frames around it. Repairing the damage leaves the unit in place. Repairs from £95, with every job priced individually. Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why choose Surface Doctor in West Calder

  • A fixed quote before booking
  • Technicians who travel to you, UK-wide
  • Straight answers about what a repair can do
  • No need to remove anything

Take a look at our full price list.

What a repair cannot fix

Not everything can be repaired, and we will tell you before we start. We can’t fix:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send photos and we will say what we think.

Materials we work on in West Calder

  • Window frames & sills
  • Coloured and woodgrain uPVC
  • Doors & door panels
  • White uPVC
  • Conservatory frames

Do you need uPVC repair in West Calder?

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and removed fittings leave holes.

Send us a picture if you notice any of these:

  • Burns on sills
  • Scratches from ladders and furniture
  • Holes from removed fittings and alarms
  • Chips and dents

What to look for in a quote

  • If travel is included in the price
  • What preparation is included
  • How the colour is matched
  • How soon you can use it again

10 questions to ask before booking

What we do, step by step

The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the work takes a few hours. Before we leave, we explain how soon it can be used and how to care for it.

  1. We start by cleaning the frame.
  2. Scratches, chips and holes are filled.
  3. The repair is sanded smooth.
  4. We colour-match the finish, including woodgrain effects.
  5. The repair is blended into the surface around it.

Before we arrive

  • Tell us about parking, stairs or access
  • Let the surface dry out before the visit
  • Keep a parking space free if you can

Ask for a price

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.

Send photos for a quote

Related advice

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

For landlords and businesses

For anyone letting property in or around West Calder, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.