Hertfordshire · England

Worktop Repair for Hay Street homes

We travel to Hay Street for chip, burn and scratch repairs to kitchen and bathroom worktops. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Cuts and scratches in the surface
  • Chips near the sink
Surface Doctor technician repairing a wooden kitchen worktop

Book worktop repair in Hay Street

Worktop repair at your home in Hay Street

We repair chips, burns and scratches in laminate, stone, quartz, solid surface and wooden worktops, with colour and pattern matched by hand. The worktop stays in place. We work on quartz, solid wood and solid surface (such as Corian), and common reasons people get in touch are damage to a stone worktop and burns from hot pans.

Big or small, it’s backed by a one-year guarantee in Hay Street and across Hertfordshire.

Chips in speckled granite tiles filled and colour matched, before and after
Location
Hay Street (SG11)
Region
Hertfordshire
Guarantee
One year on every repair
Price
From £95. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

FAQs for Hay Street

Is there any odour?

Expect a mild smell while we are working.

Is it messy?

No. The work area is masked and covered, and we leave the room clean.

What information do you need?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Can you repair something that is been repaired before?

Usually, yes. We remove the old repair before doing a new one, so let us know about it.

Will the repair match a patterned worktop?

Yes. We recreate the pattern by hand so it blends in.

Which areas do you work in?

We work UK-wide. Prices don’t change with location.

What does worktop repair cost?

Repairs from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.

Work for landlords and builders

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.

Repair or replace: which is better?

Even a single new length of worktop means templating, cutting and refitting the sink and hob. A repair is a few hours with everything left in place. Repairs from £95, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why us?

  • Every repair guaranteed for a year
  • Colour-matched on site
  • Free fixed quotes from pictures
  • Rooms protected and left tidy

Read our pricing.

Different materials, different repairs

Laminate

A laminate worktop is a thin decorative layer on a board. Damage is filled and the pattern painted in by hand.

Quartz

Quartz is tough, though edges can chip. We fill chips with a tinted resin and polish them to the worktop’s finish.

Hay Street and the surrounding area

Hay Street is about 7 miles north-west of Bishop's Stortford, in Hertfordshire. Customers in Hay Street get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We cover all 381 towns and villages across Hertfordshire. Our jobs stretch from Hay Street to London (29 miles away).

Our technicians cover all of SG11 and the streets around it. Other places close to Hay Street include Braughing (1 mile south-east), Westmill (2 miles west), Aspenden (2 miles north-west), Great Hormead (2 miles north) and Buntingford (3 miles north-west). Within a short drive, we also cover Stevenage (9 miles west), Bishop's Stortford (7 miles south-east), Welwyn Garden City (12 miles south-west), Hitchin (13 miles west), Hoddesdon (11 miles south) and Cheshunt (15 miles south).

What’s near Hay Street

Locally, our jobs take us to homes close to Jenyns First School and Nursery, Adam And Eve Public House and Parish Church of St Mary the Virgin and the streets around them. Further afield, we also cover the area around Brent Pelham (3.7 miles north-east).

Map of Hay Street © OpenStreetMap contributors

Honest limits

Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:

  • A worktop that has moved because its support has failed
  • A cracked stone top that’s unsupported
  • Deep heat discolouration in quartz, which may not fully disappear

If in doubt, send photos and we will say what we think.

What we work on

  • Granite & marble
  • Quartz
  • Solid wood
  • Laminate
  • Solid surface (such as Corian)

Prices and what affects them

Prices start from £95. There is no area surcharge for Hay Street. The price reflects:

  • Unusual colours or finishes
  • Whether old repairs or coatings need taking off
  • How many areas need work
  • What the surface is made of

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Send photos for a quote

Photographing the damage takes a minute. Please include:

  • A wider photo showing the entire worktop
  • Good light, ideally daylight, without flash glare
  • The postcode, so we can plan the visit
  • The material, if you know it

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.

How to care for the repair

Looking after the surface is easy, and it makes a real difference:

  • Always use a trivet for hot pans
  • Keep joints and edges dry
  • Clean spills right away
  • Re-oil timber worktops

Never put hot pans straight onto the worktop. Heat can mark quartz and stone as well.

Edge chips can get bigger, and water can reach the core of laminate. An early repair prevents it.

How the visit works

Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a few hours, depending on the damage, and we leave the room as we found it.

  1. First, we check the damage and the finish we need to match.
  2. Burnt or loose material is cut back.
  3. We fill and shape the damaged area.
  4. The pattern, flecks or grain are recreated.
  5. It’s finished to the same sheen and left to cure.

Before we arrive

  • Point us to the nearest place to park
  • Keep pets and children out of the room while we work
  • Let the surface dry out before the visit

Get a quote

The quickest way to a price is to send a couple of photos using our quote form or call us. We will say right away whether it can be repaired.

Send pictures for a quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.