Kent · England
Worktop repair in Hunton, Kent
Worktop repair for Hunton, without a refit. Send us pictures for a fixed price, then we come to you.
- Repairs from £95
- Chips caused during installation
- Damage around the sink cut-out
Worktop repair in Hunton without replacing anything
Laminate, quartz, granite, solid surface and wooden worktops can all be repaired, with colour and pattern matched by hand. Nothing is taken out. Whether it’s scorch marks from pans and damage from fitting or building work, we can normally put it right, whatever the material.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Where
- Hunton (ME15)
- County
- Kent
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Hunton
Hunton is about 4 miles south-west of Maidstone, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Hunton is one of 922 towns and villages in Kent we cover. You can also see our page for London, about 31 miles away.
Here we cover the ME15 postcode area. Whether you live on West Street, Bensted Close and Bishop's Lane or a nearby road, a technician can come to you. Other places close to Hunton include Benover (1 mile west), Yalding (1 mile north-west), Congelow (1 mile west), Chainhurst (1 mile south-east) and Laddingford (2 miles west). We also work in nearby towns such as Maidstone (4 miles north-east), Sittingbourne (15 miles north-east), Sevenoaks (13 miles west), Royal Tunbridge Wells (10 miles south-west), Gravesend (15 miles north) and Tonbridge (8 miles west).
Local landmarks in Hunton
Typical jobs here are in homes near Quarry Wood, Hunton Church of England Primary School and St Mary's Church and the streets around them. For rail, the closest station is Yalding station, about 2.1 miles west. Nearby you will also find Teapot Island (1.8 miles west) and Oakwood Hospital (3.7 miles north).
What affects the price in Hunton
Repairs from £95. Every quote is fixed and free. What we look at:
- How easy the damage is to reach
- How many areas need work
- The material
- Whether it’s a chip, crack, burn or wear
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send photos for a quote
You can take the pictures on your phone, there’s no need for anything special. Just ensure we can see:
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- Any details about the material
- A close-up of the damage, in focus
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Repairing versus replacing in Hunton
If the worktop is swollen by water or badly damaged along its length, replacement may be the answer. For chips, burns and scratches, a repair is the better value. Our worktop repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
What you get with us
- Colour mixed on the day to match
- No extra charge for your area
- We come to you, anywhere in the UK
- A fixed quote before you book
See our pricing.
Common questions in Hunton
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you price it without visiting?
Nearly always. If photos do not show enough, we will ask for another angle.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Landlord and trade work in Hunton
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Keep wood oiled
- Wipe up spills quickly
- Dry around the sink and joints
- Use pH-neutral cleaners on stone
Never put hot pans straight onto the worktop. Even stone and quartz can be marked by heat.
Damage near the sink is worth repairing quickly, because water gets in and swells the board.
What your worktop is made of matters
Laminate
Laminate is a printed surface over a board. Chips and burns are filled and the pattern recreated.
Solid surface
Solid surface tops are the same material all the way through, so marks can often be sanded and refinished.
Towns and villages near Hunton
Other services in Hunton
When to call us in Hunton
Water around the sink can get into laminate and wood joints, and that can make them swell.
Keep an eye out for any of the following:
- Snagging damage in a new kitchen
- Chips in quartz or granite
- Cuts and scratches in the surface
- A heat mark or burn
Before booking anyone
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- What preparation is included
- What happens if they find more damage
What happens on the day
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- First, we check the damage and the finish we need to match.
- We cut back any burnt or loose material.
- The area is filled and shaped.
- The pattern, flecks or grain are recreated.
- We finish it to match the sheen and leave it to cure.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
Get a quote
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
