Neath Port Talbot · Wales

Worktop Repair in Jersey Marine

Our technicians come to Jersey Marine for chip, burn and scratch repairs to kitchen and bathroom worktops. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Chips on edges and corners
  • Chips in quartz or granite
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair in Jersey Marine

About our worktop repair in Jersey Marine

Matching a pattern is the skilled part of a worktop repair. We build up the colour and flecks by hand so the repair blends in. Typical jobs include chips caused during installation and chips on edges and corners, in solid wood, quartz and granite & marble.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Area
Jersey Marine (SA10)
Area hub
Neath Port Talbot
Cover
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026
Surface Doctor technician repairing a wooden kitchen worktop

Aftercare tips

Simple care helps the repair last. We recommend:

  • Do not let water sit on joints
  • Never put hot pans down directly
  • Use a chopping board
  • Watch the edges with heavy pans

Wipe water away from joints and around the sink, especially on laminate and wood.

Daily use can make burns and chips worse, especially near the sink. Repairing it sooner keeps the job smaller.

Covering Jersey Marine

Jersey Marine is about 3 miles south-west of Neath, in Neath Port Talbot. Clients in Jersey Marine get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Jersey Marine is one of 100 places in Neath Port Talbot where we work.

Jobs in SA10 are booked in the same way as anywhere else. From Heol Newydd, Ashleigh Terrace and Heol yr Ysgol or anywhere nearby, a technician can come to you. You’ll find Jersey Marine on the B4290, which makes it straightforward to reach. We also cover the places around Jersey Marine: Llandarcy (1 mile north), Coed Darcy (1 mile north), Coedffranc (1 mile north), Crymlyn Burrows (1 mile south-west) and Baglan Bay (2 miles south-east). Within a short drive, we also cover Neath (3 miles north-east), Port Talbot (4 miles south-east), Sandfields (4 miles south-east), Mount Pleasant (3 miles north-east), Baglan Moors (3 miles south-east) and Sandfields West (3 miles south-east).

Near you in Jersey Marine

Around Jersey Marine, we work in homes near The New Tower Hotel, Cefn Hengoed Community School and St Margaret's Chapel, among other places. The closest station to Jersey Marine is Briton Ferry station, roughly 1.9 miles east of the centre. Nearby you will also find Neath Port Talbot Hospital (3.4 miles south-east) and Briton Ferry Motte (1.2 miles east). Not far away are Penisa'r-coed and Pluck Lake.

Map of Jersey Marine © OpenStreetMap contributors

FAQs for Jersey Marine

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

What areas do you cover?

The entire UK, including all of Neath Port Talbot. Just include your postcode and we will confirm dates.

Do you repair quartz?

Yes. Chips on edges and around the sink are very common repairs, filled and polished to match.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

Is a burnt worktop repairable?

Generally. Send us a picture and we’ll tell you.

Do the materials smell?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

What your worktop is made of matters

Solid surface

Solid surface tops are the same material all the way through, so marks can often be sanded and refinished.

Wood

Wooden worktops can be sanded, filled and re-oiled, and burns and dents repaired.

What we are called out for in Jersey Marine

Cut-outs for the sink and hob are the weakest parts, so cracks and chips often start there.

Keep an eye out for any of the following:

  • Burns from hot pans
  • Chips in quartz or granite
  • Chips on edges and corners
  • Damage around the sink cut-out

Questions to ask before you book

  • How changes to the job are handled
  • The length of the guarantee and what it covers
  • How soon you can use it again
  • How the colour is matched

How to compare quotes

How the visit works

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. You can expect it to take a few hours, and we’ll keep you posted as we go.

  1. The area around the damage is protected.
  2. We clean the damage and remove anything loose.
  3. It’s filled and levelled with the surface.
  4. The colour and pattern are built up by hand.
  5. The repair is sealed and polished to match.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Let us know which floor the room is on
  • Point us to the nearest place to park

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.

Get a fixed quote

Read more

When a repair is not the answer

Before you book, it’s worth knowing the limits:

  • Through cracks in stone that is moving
  • A worktop that has moved because its support has failed
  • Laminate that has blown or swollen

If in doubt, send photos and we’ll say what we think before booking.

Materials we repair

  • Quartz
  • Granite & marble
  • Solid wood
  • Laminate
  • Solid surface (such as Corian)

How we price worktop repair

Prices start from £95. Every quote is fixed and free. What we look at:

  • The type of damage
  • The colour and finish to match
  • How many areas need work
  • The material and finish

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Send pictures for a quote

When you take your pictures, a few simple things make all the difference:

  • A wider photo showing the whole worktop
  • Daylight if possible, and no flash reflection
  • Any details about the material
  • Details of any past repairs

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Why repair rather than replace?

Even if you could get the same laminate, it may not match after years of light and use. A repair is matched to what you have now. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.

Why choose Surface Doctor in Jersey Marine

  • No need to remove anything
  • Colours mixed by hand to suit your surface
  • Rooms protected and left tidy
  • Honest advice, even when it means no job

Read our full price list.

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.