Caerphilly · Wales
Bath re-enamelling & resurfacing in Abertridwr, Caerphilly
We travel to Abertridwr for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
Bath re-enamelling in Abertridwr, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Whether it’s chips and rust in more than one place and a peeling or bubbling previous coating, we can normally put it right, whatever the material.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Area
- Abertridwr (CF83)
- County
- Caerphilly
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price is based on:
- Whether we combine several jobs
- The material and finish
- How much damage there is
- How easy the damage is to reach
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- One picture of the whole bath
- The postcode, so we can plan the visit
- Something in shot to show the size
- Any earlier repairs or coatings
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say immediately if a repair is the right fix.
Nearby places to Abertridwr
Other services in Abertridwr
Keeping it looking good
Looking after the surface is easy:
- Don’t leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
- A dripping tap should be fixed promptly
- Have chips seen to early
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Landlord and trade work in Abertridwr
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Questions from Abertridwr
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Will there be a smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
When we’d advise against a repair
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that is cracked right through
Send us pictures and we’ll tell you honestly.
Materials we work on in Abertridwr
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
How the visit works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a full day, tidy-up included.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Related advice
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Everything repaired in place
- We’ll tell you if it’s not worth repairing
- No extra charge for your area
- Technicians who travel to you, UK-wide
Read our full price list or guide to resurfacing and replacement costs.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Abertridwr and the surrounding area
Abertridwr is about 2 miles north-west of Caerphilly, in Caerphilly. Jobs in Abertridwr are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Abertridwr is one of 94 places in Caerphilly we cover.
Here we cover the CF83 postcode area. Whether you live on High Street, Cross Street and King Street or anywhere nearby, a technician can come to you. We also cover the places around Abertridwr: Eglwysilan (1 mile west), Penyrheol (1 mile east), Hendredenny (1 mile south-east), Groes-wen (2 miles south) and Energlyn (2 miles east). Within a short drive, we also cover Blackwood (6 miles north-east), Risca (7 miles east), Ystrad Mynach (4 miles north), Cefn Fforest (6 miles north-east), Pontllanfraith (5 miles north-east) and Trecceln (7 miles north-east).
Landmarks near Abertridwr
We visit homes around Cwmaber Junior School, Panteg Hotel and Cardinal Newman RC School and the streets around them. The closest station to Abertridwr is Llanbradach station, roughly 1.7 miles east of the centre. Other landmarks nearby include Pontypridd Cottage Hospital (2.4 miles west) and Caerphilly Castle (2.5 miles south-east). Open spaces near Abertridwr include Mynydd Meio.
About our accreditations · Every repair comes with a one-year guarantee.
