Northumberland · England
Bath Re-enamelling for Akeld homes
Bath re-enamelling in Akeld without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Worn patches where water runs and sits
- Stains that won’t shift
Landlords, agents and businesses in Akeld
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Bath re-enamelling at your home in Akeld
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for lots of chips and rust spots and wear marks under the taps, on basins & shower trays, cast iron baths and pressed steel baths.
Big or small, you get the same one-year guarantee.
- Where
- Akeld (NE71)
- County
- Northumberland
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Akeld: your questions answered
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you work in Akeld?
Yes, we do. Repair technicians travel to Akeld from across the region, with no extra charge for travel.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Covering Akeld
Akeld is about 14 miles south of Berwick-upon-Tweed, in Northumberland. We visit clients in Akeld and the surrounding area, so you don’t need to take anything anywhere. Akeld is one of 189 towns and villages in Northumberland where we work. You can also see our page for Newcastle upon Tyne, about 43 miles away.
Here we cover the NE71 postcode area. With the A697 close by, Akeld is easy for our technicians to reach. Other places close to Akeld include Wooler (2 miles south-east), Milfield (3 miles north-west), Doddington (3 miles north-east), Chatton (6 miles east) and Lowick (7 miles north-east). Further out, we also cover Berwick-upon-Tweed (14 miles north), Coldstream (10 miles north-west), East Ord (14 miles north), Spittal (14 miles north) and Belford (10 miles east).
Around Akeld
A little further out are Cheviot Museum And Field Centre (2.3 miles south-east) and Glendale (2.7 miles north-west). For a walk, there’s White Law.
Repair or replace in Akeld?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
What you get with us
- Dust sheets down, tidy finish
- Colour-matched on site
- Every repair guaranteed for a year
- Same prices wherever you are
Read our full price list and guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. There is no charge for travel to Akeld. The price depends on:
- Doing more than one item at once
- The type of damage
- Where the damage is and how we get to it
- The material
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
When you take your photos, these tips help us give you a firm price:
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- A picture taken from further back
- Something in shot to show the size
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
Nearby places to Akeld
Other services in Akeld
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a full day. We clean up when we’re done and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the day after.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Ensure the room can be ventilated
- Let us know if it has been repaired before
How to get a price
For a price in Akeld, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
When a repair is not the answer
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Akeld
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Aftercare tips
Once the work has cured, treat it gently:
- Have chips seen to early
- Do not use the bath until it has fully cured
- A dripping tap should be fixed promptly
- Rinse off hair dye, oils and bath bombs right away
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
About our accreditations · Every repair comes with a one-year guarantee.
