Northumberland · England
Bath re-enamelling & resurfacing in Belford, Northumberland
Local bath re-enamelling for Belford: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- An old resurfacing that’s failing
Landlords, agents and businesses in Belford
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
Landlords, letting agents and housing providers in Belford use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Bath re-enamelling in Belford without replacing anything
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include a bath in a colour that no longer suits and worn patches where water runs and sits, across basins & shower trays, pressed steel baths and acrylic baths.
Every repair comes with a one-year guarantee.
- Location
- Belford (NE70)
- Region
- Northumberland
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. We price every job individually. What matters most is:
- How easy the damage is to reach
- The material and finish
- How hard the colour is to match
- Previous DIY repairs that have to come out
We charge the same wherever you are, with no extra for Belford. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
Most quotes are done from photos alone. To make it quick:
- One sharp close-up of the damage
- Details of any past repairs
- The postcode, so we can plan the visit
- One picture of the whole bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
- Have a window or extractor fan available
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Your questions about bath re-enamelling in Belford
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
What information do you need?
Send photos through the quote form or call 0345 017 0787.
What happens once I’ve sent photos?
You’ll get a fixed quote back. There’s no obligation to book.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. If there is more, we will tell you before starting.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Belford.
Common problems we fix in Belford
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.
Typical reasons for a call-out include:
- An old resurfacing that’s failing
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- Wear marks under the taps
Questions to ask before you book
- When it can be used again
- Whether the price covers travel
- Who turns up on the day
- Is the price fixed, and does it include VAT?
About Belford
Belford is about 14 miles south-east of Berwick-upon-Tweed, in Northumberland. Jobs in Belford are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Belford is one of 189 places in Northumberland where we work. Our nearest city page is Newcastle upon Tyne, about 43 miles away.
We cover every part of NE70. Jobs here include addresses on High Street, Station Road and Dinningside. If you’re just outside Belford, we cover Middleton (1 mile north), Waren Mill (2 miles east), Warenford (4 miles south-east), Burton (4 miles east) and Bamburgh (4 miles east). Larger places within reach include Berwick-upon-Tweed (14 miles north-west), Alnwick (14 miles south), Wooler (8 miles south-west), Seahouses (7 miles east), East Ord (13 miles north-west) and Spittal (13 miles north-west).
Around Belford
We visit homes around Church of St Mary, Salmon Inn and Belford Primary School and the streets around them. Further afield, we also cover the area around Fenham Castle (4.6 miles north) and Belford Rural District (2.6 miles south). The countryside around Belford includes Brada Hill and Holburn Lake and Moss.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Keeping it looking good
Once the work has cured, treat it gently:
- Have chips seen to early
- Avoid suction-cup mats
- Wash away dyes and oils after use
- Repair dripping taps early
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Nearby places to Belford
More services for Belford
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Why repair rather than replace?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- Fixed prices from your pictures
- Everything repaired in place
- Work done at your home or business
- We’ll tell you if it’s not worth repairing
Take a look at our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
