Pembrokeshire · Wales
Bath Re-enamelling for Albert Town homes
Our repair technicians come to Albert Town for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- Lots of chips and rust spots
Bath re-enamelling in Albert Town, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s a coating lifting around the plughole and brown or grey marks that don’t clean off, we can usually put it right, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Albert Town (SA61, SA73)
- County
- Pembrokeshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Albert Town
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day. Prices start from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why book with us
- Usually one visit, start to finish
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
Take a look at our pricing or bath cost comparison.
Common questions in Albert Town
Do you work in Albert Town?
Yes. We work across the UK and come to Albert Town. Send us photos for a fixed quote, or call 0345 017 0787.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Stick to gentle, non-abrasive cleaners
- Don’t leave a chip unrepaired
- Don’t let dyes or oils sit on the finish
- Store bottles off the bath
Dry the bath after use if possible, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Also near Albert Town
What else we do in Albert Town
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
When we would advise against a repair
Some jobs aren’t right for a repair, including:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
Send us pictures and we will tell you honestly.
What we work on
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take a full day, tidy-up included.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.
Advice
Albert Town and the surrounding area
Albert Town is about 1 mile south-west of Haverfordwest, in Pembrokeshire. We visit clients in Albert Town and the surrounding area, so there is no workshop to go to. We work in all 223 towns and villages across Pembrokeshire.
Here we cover the SA61 and SA73 postcode area. From Mill Lane, Rose Avenue and Bethany Road or a nearby road, a technician can come to you. Albert Town is on the A4076, so it’s easy for us to reach. Close by, we cover Haroldston St. Issell's (1 mile north-west), Merlin's Bridge (1 mile east), Uzmaston (2 miles east), Freystrop (2 miles south) and North Johnston (2 miles south). We also work in nearby towns such as Milford Haven (6 miles south-west), Pembroke (8 miles south), Pembroke Dock (7 miles south), Dinbych-y-Pysgod (14 miles south-east), The Green (14 miles south-east) and Fishguard (14 miles north).
Around Albert Town
Around Albert Town, we work in homes near The Glen pub, Mary Immaculate V.R.C. School and Roman Catholic Church of Saint David and Saint Patrick and the streets around them. Also close by are Tasker-Milward V.C. School (0.5 miles north) and Pembrokeshire College (within half a mile north). The nearest railway station is Haverfordwest station, roughly 1.2 miles north-east of the centre. A little further out are Former County Gaol (1 mile north-east) and Withybush General Hospital (1.7 miles north-east). For a walk, there is Boulston Hill.
Common problems we fix in Albert Town
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
If you can see any of these, send us a picture:
- Thin, worn enamel in places
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- A coloured bath you want in white
What to look for in a quote
- Who will actually do the work
- What protection goes down before work starts
- What the guarantee covers, and for how long
- Whether they match the colour on site
What bath re-enamelling costs
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- The colour and finish to match
- What kind of damage it is
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
Two or three clear pictures are generally enough. Try to include:
- A photo taken from further back
- Natural light rather than flash
- Details of any past repairs
- One sharp close-up of the damage
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
About our accreditations · Every repair comes with a one-year guarantee.
