Pembrokeshire · Wales
Bath Re-enamelling for Milford Haven homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Milford Haven. Send photos for a free, fixed quote.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
How we handle bath re-enamelling in Milford Haven
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. We’re often asked to fix a bath that stays dull however much you clean it and a coating lifting around the plughole, in pressed steel baths, basins & shower trays and Victorian roll-tops.
All our work is covered by a one-year guarantee, wherever you are in Pembrokeshire.
- Where
- Milford Haven (SA73)
- Area hub
- Pembrokeshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
When to call us in Milford Haven
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
Questions to ask before you book
- What aftercare is recommended
- Who will actually do the work
- Whether the colour is mixed to match
- What happens if they find more damage
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Milford Haven customers choose us
- A year’s guarantee on all work
- Fixed prices from your photos
- Usually one visit, start to finish
- No extra charge for your area
See our pricing and guide to resurfacing and replacement costs.
Milford Haven questions
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Can you fix a peeling bath coating?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Our work in Milford Haven
Milford Haven (Welsh: Aberdaugleddau) is about 38 miles west of Llanelli, in Pembrokeshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Milford Haven is one of 223 towns and villages in Pembrokeshire where we work.
All of SA73 is within our area, from the main roads to the quietest streets. You’ll find streets such as Church Road, Imogen Place and Albion Street, all of which we cover. With the A4076 and B4325 close by, Milford Haven is easy for our repair technicians to reach. We also cover the places around Milford Haven: Pill (1 mile east), Haven's Head (1 mile west), Coombs (1 mile east), Hakin (1 mile west) and Priory (1 mile north). We also work in nearby towns such as Haverfordwest (7 miles north-east), Pembroke (6 miles south-east), Pembroke Dock (4 miles east), The Marsh (7 miles north-east), Dinbych-y-Pysgod (14 miles east) and The Green (14 miles east). Milford Haven is one of the larger places we cover in Pembrokeshire.
Around Milford Haven
Typical jobs here are in homes near Church Of St Katharine, The Victoria Inn and Milford Haven School and the streets around them. There’s a railway station in Milford Haven itself: Milford Haven station. Other landmarks nearby include Castle Pill (0.8 miles east) and Pembroke Dock Heritage Centre (3.9 miles east). Green spaces nearby include North Hill and Hubberstown Pill.
Also in Milford Haven
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- Whether we combine several jobs
- The colour and finish to match
- The size and number of damaged areas
- Where the damage is and how we get to it
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Send pictures for a quote
Two or three clear pictures are typically enough. Try to include:
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
Send us a photo of the damage and one of the whole item, and tell us you’re in Milford Haven, and we’ll come back with a fixed quote.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Store bottles off the bath
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
- Have chips seen to early
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Leaking taps or wastes (a plumber’s job)
- A bath that’s rusted through
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
How it works
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take the best part of a day, tidy-up included.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Preparing for the visit
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
- Open a window if you can
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
