Surrey · England
Bath re-enamelling & resurfacing in Albury, Surrey
Bath re-enamelling in Albury without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
Bath re-enamelling in Albury, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Common call-outs are for a coating lifting around the plughole and thin, worn enamel in places, in Victorian roll-tops, pressed steel baths and basins & shower trays.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Albury (GU5)
- Region
- Surrey
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Repair or replace in Albury?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
What you get with us
- One visit for most repairs
- Colours mixed by hand to suit your surface
- No need to remove anything
- Honest advice, even when it means no job
Read our full price list and guide to resurfacing and replacement costs.
Work for landlords and builders
If you manage property in Albury, we will quote for several properties at once. Just send pictures for each address and we will price them together.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Do you need bath re-enamelling in Albury?
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
Most people contact us when they notice one of these:
- Several chips and rust patches
- A bath in a colour that no longer suits
- Staining under the taps and around the waste
- Enamel that is lost its shine and feels rough
Comparing quotes
- How changes to the job are handled
- Who turns up on the day
- How your room will be protected
- What preparation is included
How the visit works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the day after.
Preparing for the visit
- Open a window if you can
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
Get a quote
Send us a photo of the damage and one of the entire item, and tell us you’re in Albury, and we’ll come back with a fixed quote.
Advice
Our work in Albury
Albury is about 4 miles south-east of Guildford, in Surrey. Anywhere in GU5, we come to you. Albury is one of 395 places in Surrey we cover. Our jobs stretch from Albury to London (about 26 miles away).
Our repair technicians cover all of the GU5 postcode area and the streets around it. Streets in the area include Weston Fields, Church Lane and Albury Street, and we cover them all. Close by, we cover Albury Heath (1 mile south-east), Little London (1 mile south-east), Shere (1 mile east), Gomshall (2 miles east) and East Clandon (2 miles north). We also work in nearby towns such as Guildford (4 miles north-west), Woking (7 miles north-west), Camberley (13 miles north-west), Epsom (13 miles north-east), Horley (14 miles east) and Redhill (14 miles east).
Near you in Albury
Locally, our jobs take us to homes close to Church of St Peter and St Paul and The Drummond Arms, among other places. The nearest railway station is Chilworth station, roughly 1.3 miles west. Other landmarks nearby include Shere Museum (1.5 miles east) and Guildford Castle (3.4 miles west). For a walk, there is Combe Bottom and Silent Pool.
Aftercare tips
After the repair has cured, a few habits help it last:
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
- Do not use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What affects the price in Albury
Prices start from £350. We charge the same across the UK, including Albury. The price reflects:
- Where the damage is and how we get to it
- Whether we combine several jobs
- The size and number of damaged areas
- What kind of damage it is
A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Getting a price from photos
Two or three clear photos are typically enough. It helps if you send:
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- Any details about the material
- Natural light rather than flash
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Towns and villages near Albury
Other services in Albury
FAQs for Albury
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Surrey.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
When we would advise against a repair
Before booking, it’s worth knowing the limits:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that’s cracked right through
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
