Derbyshire · England
Bath Re-enamelling in Alicehead
Fixed-price bath re-enamelling in Alicehead and the surrounding area, generally in one visit.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath in a colour that no longer suits
About our bath re-enamelling in Alicehead
Most baths are re-enamelled in a day, and you can use the bath the following day. Nothing is disconnected or removed. We regularly repair cast iron baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are several chips and rust patches and staining under the taps and around the waste.
Big or small, you get the same one-year guarantee.
- Where
- Alicehead (S45)
- Region
- Derbyshire
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Prices start from £350. There is no charge for travel to Alicehead. The price depends on:
- How hard the colour is to match
- Doing more than one item at once
- Access to the area
- The material and finish
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed quote
You can normally get a fixed quote without us visiting. To make it quick:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- Natural light rather than flash
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Repairing versus replacing in Alicehead
A replacement often means several trades over several days. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why us?
- Colour-matched on site
- No need to remove anything
- One-year guarantee on every repair
- We come to you, anywhere in the UK
Read our full price list or guide to resurfacing and replacement costs.
Questions from Alicehead
What happens next?
You will get a fixed quote back, generally with dates to choose from. There’s no obligation to book.
Do you cover the entire of Derbyshire?
Across the UK, so Alicehead is covered. Prices do not change with location.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Do you cover Alicehead?
Yes, we do. We send a technician to Alicehead for every job, and the price is the same as everywhere else.
Are there extra charges for Alicehead?
No. Our quotes include travel, with the same prices everywhere we work.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Do you need bath re-enamelling in Alicehead?
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Contact us if you’ve noticed:
- A roll-top that’s seen better days
- Lots of chips and rust spots
- Thin, worn enamel in places
- Brown or grey marks that do not clean off
Comparing quotes
- What prep work is covered
- How long it needs to cure
- What happens if the damage is worse than the photos show
- What protection goes down before work starts
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
When we’d advise against a repair
A repair isn’t right for every job, including:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Alicehead
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
What we do, step by step
Here’s how a visit generally runs: we arrive on time, protect everything around the work area, do the job and clear up. Plan for the best part of a day. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
Get a quote
Email us pictures of the damage and a wider shot of the whole item, and tell us you are in Alicehead, and we will reply with a fixed price.
Advice
Also in Alicehead
Landlords, agents and businesses in Alicehead
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
Where we work around Alicehead
Alicehead is about 4 miles north-east of Matlock, in Derbyshire. Jobs in Alicehead are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Alicehead is one of 532 places in Derbyshire we cover. You can also see our page for Manchester, about 36 miles away.
We work across the S45 postcode area and the streets around it. We also cover the places around Alicehead: Uppertown (1 mile south-west), Brockhurst (1 mile south), Slack (2 miles south), Lumsdale (3 miles south-west) and Matlock (4 miles south-west). Further out, we also cover Chesterfield (4 miles north-east), Belper (11 miles south), Heanor (14 miles south-east), Dronfield (8 miles north), Ripley (11 miles south) and Bolsover (9 miles east).
Around Alicehead
Locally, our jobs take us to homes close to Red Lion pub, among other places. The closest station to Alicehead is Matlock station, roughly 4.3 miles south-west of the centre. Other landmarks nearby include Walton Hospital (3.3 miles north-east). Open spaces near Alicehead include Beeley Moor.
About our accreditations · Every repair comes with a one-year guarantee.
