North Yorkshire · England
Bath Re-enamelling in Allerston
Damaged bath in Allerston? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- An outdated colour you’d like to change
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Use washing-up liquid and a soft cloth
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Bath re-enamelling in Allerston without replacing anything
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. If you are dealing with stains that won’t shift and chips and rust in more than one place, we can typically put it right, whatever the material.
All our work is covered by our one-year guarantee.
- Area
- Allerston (YO18)
- Region
- North Yorkshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
We work cleanly and quietly. Protection goes down first, then the work takes a full day. Before we leave, we explain the curing time and the aftercare.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Mention if the room is upstairs or in a flat
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Read more
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- Problems we can’t see until an old finish comes off
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
Common questions in Allerston
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Repair or replace: which is better?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the next day. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
What you get with us
- Fixed prices from your pictures
- Accredited with CHAS, Constructionline and SafeContractor
- Colour-matched on site
- Dust sheets down, tidy finish
See our full price list or resurfacing vs replacement cost guide.
Allerston and nearby
Allerston is about 10 miles west of Scarborough, in North Yorkshire. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. We cover all 626 towns and villages in North Yorkshire, from the larger towns to small villages. You can also see our page for Leeds, about 47 miles away.
All of YO18 is covered. Jobs here include addresses on Main Street, Toc Lane and Back Lane and the roads around them. We also cover the places around Allerston: Wilton (1 mile west), Ebberston (1 mile east), Yedingham (2 miles south), Ellerburn (3 miles north-west) and Snainton (3 miles east). Within a short drive, we also cover Scarborough (10 miles east), Falsgrave (10 miles east), Malton (9 miles south-west), Filey (15 miles east), Pickering (5 miles west) and Northstead (11 miles north-east).
Near you in Allerston
Around Allerston, we work in homes near Cavley Arms and Church of Saint John and the streets around them. A little further out are Mathewson's Motor Museum (3 miles west).
Landlords, agents and businesses in Allerston
We work for landlords, letting agents and housing providers in Allerston as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Nearby places to Allerston
What else we do in Allerston
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Allerston. What changes the price is:
- How hard the colour is to match
- What kind of damage it is
- Previous DIY repairs that have to come out
- How easy the damage is to reach
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- Any earlier repairs or coatings
- A picture taken from further back
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
For a price in Allerston, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.
