Derbyshire · England
Bath re-enamelling & resurfacing in Ambaston, Derbyshire
Bath re-enamelling in Ambaston without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Stains that won’t shift
Ambaston and nearby
Ambaston is about 3 miles west of Long Eaton, in Derbyshire. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. Ambaston is one of 532 towns and villages in Derbyshire we cover. Our jobs stretch from Ambaston to Birmingham (36 miles away).
Here we cover the DE72 postcode area. If you’re just outside Ambaston, we cover Draycott (1 mile north-east), Elvaston (1 mile north-west), Thulston (1 mile west), Church Wilne (1 mile east) and Shardlow (2 miles south-east). Within a short drive, we also cover Swadlincote (11 miles south-west), Ilkeston (6 miles north), Long Eaton (3 miles east), Belper (11 miles north-west), Heanor (9 miles north) and Ripley (11 miles north).
Landmarks near Ambaston
In Ambaston, that means homes near St Mary's Church, Shardlow Hall and Draycott Community Primary School, among other places. For rail, the closest station is Spondon station, roughly 2.5 miles north-west. Other landmarks nearby include Elvaston Castle (1.3 miles west) and Aston Hall Hospital (2.3 miles south).
How we handle bath re-enamelling in Ambaston
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on basins & shower trays, cast iron baths and pressed steel baths, and the jobs we see most are enamel that’s lost its shine and feels rough and stains that won’t shift.
Every job is backed for twelve months in Ambaston and everywhere else. If something goes wrong with the work, we come back.
- Where
- Ambaston (DE72)
- Area hub
- Derbyshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Ambaston
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Will there be a smell?
There can be some smell while we work. It fades as everything cures.
How long will the bath be out of use?
One day for most baths and can be used the day after. We give you timings with the quote.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Which areas do you work in?
We cover the entire UK, including Ambaston and the rest of Derbyshire. Send your postcode with your photos and we will confirm dates.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Do you need bath re-enamelling in Ambaston?
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
These are the problems we are asked about most:
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
Comparing quotes
- Whether cleaning and preparation are in the price
- How to look after the finish
- What protection goes down before work starts
- How long it needs to cure
Places near Ambaston
Also in Ambaston
What a repair can’t fix
A repair isn’t right for every job, for example:
- A cast iron or steel bath that is cracked right through
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- Access to the area
- The material
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- Something in shot to show the size
- Natural light rather than flash
- A close-up of the damage, in focus
- Details of any past repairs
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
How the visit works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes the best part of a day, and we will tell you if anything changes.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Point us to the nearest place to park
- Clear the area around the damage
- Mention any parking restrictions or tricky access
Get a quote
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Respect the curing time we give you
- Don’t let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
