Gloucestershire · England
Bath re-enamelling & resurfacing in Amberley, Gloucestershire
Fixed-price bath re-enamelling in Amberley and the surrounding area, typically in one visit.
- Resurfacing from £350
- A coating lifting around the plughole
- An outdated colour you’d like to change
FAQs for Amberley
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Bath re-enamelling in Amberley without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. If you are dealing with stains that won’t shift and wear marks under the taps, we can usually put it right, whatever the material.
A one-year guarantee comes as standard.
- Where
- Amberley (GL5)
- Area hub
- Gloucestershire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Amberley
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
What we are called out for in Amberley
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
Most people get in touch when they notice something like this:
- Brown or grey marks that do not clean off
- A dull, rough surface that will not come clean
- A roll-top that is seen better days
- Chips and rust in more than one place
What your quote should include
- What happens if they find more damage
- Whether there are any call-out or travel charges
- Whether a trained technician does the job
- Is the price fixed, and does it include VAT?
Repairing versus replacing in Amberley
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Amberley clients choose us
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
- Colour-matched on site
See our prices page or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. You will not pay by the hour. The price depends on:
- How many items we do on one visit
- How hard the colour is to match
- Any earlier repairs that need removing first
- The type of damage
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- One sharp close-up of the damage
The quickest way to a price is to send two or three pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Towns and villages near Amberley
Also in Amberley
About Amberley
Amberley is about 2 miles south of Stroud, in Gloucestershire. Jobs in Amberley are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our technicians cover all 470 towns and villages in Gloucestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 54 miles away.
We cover every part of the GL5 postcode area. Nearby, we also work in Littleworth (1 mile north-east), St Chloe (1 mile north-west), Theescombe (1 mile south), Inchbrook (1 mile south-west) and Bownham (1 mile north-east). Within a short drive, we also cover Cheltenham (14 miles north-east), Gloucester (10 miles north), St Paul's (14 miles north-east), Cirencester (11 miles east), Lansdown (14 miles north-east) and Fairview (15 miles north-east).
Near you in Amberley
In Amberley, that means homes near Marling School, Amberley Parochial School and Old Lodge Inn. You’ll also find Neu-Lindsey Nature Reserve (less than half a mile west) and Church of the Holy Trinity (less than half a mile south-east). The nearest railway station is Stroud station, roughly 2.3 miles north of the centre. Nearby you will also find Stroud General Hospital (2.3 miles north) and Dunkirk Mill Museum (0.6 miles south). Open spaces near Amberley include Coaley Peak and Frome Banks.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
How the visit works
We work cleanly and quietly. We protect the area first, then the job itself takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Ensure the room can be ventilated
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Read more
Keeping it looking good
After the repair has cured, a few habits help it last:
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
- Store bottles off the bath
- Stick to gentle, non-abrasive cleaners
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
