Isle of Anglesey · Wales
Bath Re-enamelling for Amlwch Port homes
Full bath re-enamelling and resurfacing for homes and businesses in Amlwch Port and across Isle of Anglesey. Send photos for a free, fixed quote.
- Resurfacing from £350
- An outdated colour you’d like to change
- Brown or grey marks that do not clean off
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Bath re-enamelling in Amlwch Port, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you are dealing with an original cast iron bath that needs restoring and enamel that’s lost its shine and feels rough, we can help, whatever the material.
All our work comes with a one-year guarantee.
- Location
- Amlwch Port (LL68)
- Region
- Isle of Anglesey
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Wipe the bath dry after use in hard water areas
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Where we work around Amlwch Port
Amlwch Port is about 14 miles north-east of Blackbridge, in Isle of Anglesey. We visit homes and businesses in Amlwch Port and nearby villages, so there is no workshop to go to. Amlwch Port is one of 115 towns and villages in Isle of Anglesey we cover. We work right across the region, from Amlwch Port to Liverpool (about 58 miles away).
Our technicians cover all of the LL68 postcode area. Streets in the area include Parys Road, Gorwel and Pen Cei. Other places close to Amlwch Port include Amlwch (1 mile west), Llaneilian (1 mile south-east), Pentrefelin (1 mile south-west), Amlwch Community (1 mile south-west) and Penrhyd Lastra (1 mile south-west). Further out, we also cover Holyhead (14 miles south-west), Blackbridge (14 miles south-west), Porth-y-Felin (14 miles south-west), Llangefni (11 miles south), Menai Bridge (14 miles south-east) and Stryd (15 miles south-west).
What’s near Amlwch Port
Our customers here include homes close to The Liverpool Arms, Ysgol Syr Thomas Jones and St Eleth's Church and the streets around them. Other landmarks nearby include Castell Porth Wen (2.8 miles west) and Sail Loft Museum (within half a mile north). For a walk, there’s Llyn Llaethdy and Parys Mountain.
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
Amlwch Port: your questions answered
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Amlwch Port.
What happens if you find more damage?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
What we can’t put right
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- A bath split right through the body
- Problems we cannot see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
What affects the price in Amlwch Port
Resurfacing from £350. We price every job individually, from your pictures. What matters most is:
- Whether we combine several jobs
- The material
- Access to the area
- Whether it’s a chip, crack, burn or wear
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
Good photos mean an accurate price. Here’s what helps:
- Where you are, by postcode
- A close-up of the damage, in focus
- Natural light rather than flash
- Any details about the material
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the next day.
How to prepare
- Mention any earlier repairs or resurfacing
- Open a window if you can
- Let us know about parking or access
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
Places near Amlwch Port
What else we do in Amlwch Port
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For anyone letting property in or around Amlwch Port, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.
What we are called out for in Amlwch Port
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Common reasons people in Amlwch Port contact us are:
- A coloured bath you want in white
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
Questions to ask before you book
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- How long it needs to cure
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.
