Isle of Anglesey · Wales
Bath re-enamelling & resurfacing in Amlwch Community, Isle of Anglesey
We travel to Amlwch Community for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
About our bath re-enamelling in Amlwch Community
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. If you’re dealing with worn patches where water runs and sits and brown or grey marks that don’t clean off, we can help, on Victorian roll-tops, acrylic baths and cast iron baths alike.
Every repair comes with a one-year guarantee, wherever you are in Isle of Anglesey.
- Area
- Amlwch Community (LL68, LL66)
- Area hub
- Isle of Anglesey
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
A replacement often means several trades over several days. Re-enamelling is one technician, usually one day. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Same prices wherever you are
- Everything repaired in place
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
See our full price list and guide to resurfacing and replacement costs.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Any earlier repairs that need removing first
- The colour and finish to match
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed quote
When you take your pictures, these tips help us give you a firm price:
- A close-up of the damage, in focus
- A wider photo showing the whole bath
- What it’s made of, if you know
- Details of any past repairs
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Also near Amlwch Community
Also in Amlwch Community
How the visit works
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Clear the area around the damage
Getting a price
To get a price, send two or three photos using our quote form or call us. We will say straight away if a repair is the right fix.
Read more
Amlwch Community: your questions answered
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
How long is the bath unusable?
Most baths are done in a day, ready the following day. We give you timings with the quote.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
When to call us in Amlwch Community
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Customers generally contact us about:
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
Questions to ask before booking
- Aftercare advice
- Whether the price is fixed and includes VAT
- Whether the price covers travel
- What prep work is covered
Landlords, agents and businesses in Amlwch Community
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair won’t do:
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that’s cracked right through
- Steel that has corroded right through
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Amlwch Community and nearby
Amlwch Community is about 13 miles north-east of Blackbridge, in Isle of Anglesey. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We work in 115 places across Isle of Anglesey, from the larger towns to small villages. Our jobs stretch from Amlwch Community to Liverpool (about 59 miles away).
All of LL68 and LL66 is within our area. You will find streets such as Y Lincs, Lon Bach and Maes Mona, all of which we cover. Being close to the A5025, Amlwch Community is easy for our technicians to reach. Nearby, we also work in Penrhyd Lastra (1 mile south), Pentrefelin (1 mile north-east), Burwen (1 mile north), Amlwch (1 mile north-east) and Porthllechog (1 mile north). Further out, we also cover Holyhead (13 miles south-west), Blackbridge (13 miles south-west), Porth-y-Felin (13 miles south-west), Llangefni (10 miles south), Menai Bridge (14 miles south-east) and Stryd (13 miles south-west).
What’s near Amlwch Community
Locally, our jobs take us to homes close to The Market Tavern, Our Lady Star of the Sea and St Winefride and Ysgol Syr Thomas Jones and the streets around them. A little further out are Sail Loft Museum (1.5 miles north-east) and Castell Porth Wen (1.9 miles north-west). Not far away are Parys Mountain and Llyn Llaethdy.
About our accreditations · Every repair comes with a one-year guarantee.
