Herefordshire · England
Bath re-enamelling & resurfacing in Ashperton, Herefordshire
Bath re-enamelling in Ashperton without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A roll-top that is seen better days
Bath re-enamelling in Ashperton without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. We regularly repair Victorian roll-tops, acrylic baths and basins & shower trays, and people most often call us about an outdated colour you’d like to change and staining under the taps and around the waste.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Ashperton (HR8)
- County
- Herefordshire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Ashperton?
A replacement often means several trades over several days. Resurfacing takes one technician and usually a day. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why book with us
- Rooms protected and left tidy
- Honest advice, even when it means no job
- A year’s guarantee on all work
- Free fixed quotes from pictures
See our prices page and guide to resurfacing and replacement costs.
Our work in Ashperton
Ashperton is about 9 miles east of Hereford, in Herefordshire. Clients in Ashperton get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Ashperton is one of 255 towns and villages in Herefordshire where we work. Our nearest city page is Birmingham, about 38 miles away.
We cover every part of HR8. Jobs here include addresses on Heywood Lane and Church Lane. Other places close to Ashperton include Canon Frome (1 mile north), Little Tarrington (1 mile west), Durlow Common (2 miles south-west), Tarrington (2 miles west) and Putley (2 miles south). Larger places within reach include Hereford (9 miles west), Ross-on-Wye (11 miles south), Ledbury (4 miles south-east), Leominster (14 miles north-west), Redhill (9 miles west) and Newton Farm (10 miles west).
Local landmarks in Ashperton
Our clients here include homes close to Box Bush Inn, Church of St Bartholomew and Ashperton Primary Academy, among other places. The closest station to Ashperton is Ledbury station, about 4.3 miles south-east of the centre. A little further out are Ashperton Castle (under half a mile west). Green spaces nearby include Oyster Hill and Wessington Wood & Pasture.
Keeping it looking good
After the repair has cured, a few habits help it last:
- A dripping tap should be fixed promptly
- Don’t leave bottles, razors or sponges standing on the surface
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Your questions about bath re-enamelling in Ashperton
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
What we cannot put right
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- A bath that’s rusted through
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think.
Materials we work on in Ashperton
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Places near Ashperton
Also in Ashperton
When to call us in Ashperton
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Keep an eye out for these signs:
- Wear marks under the taps
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
Before you book anyone
- What happens if they find more damage
- How long it needs to cure
- Whether the price is fixed and includes VAT
- Whether the price covers travel
Prices and what affects them
Resurfacing from £350. You will not pay by the hour. The price is based on:
- How hard the colour is to match
- What kind of damage it is
- Access to the area
- The material and finish
Our prices are the same across the UK, so there is no premium for Ashperton. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- One picture of the entire bath
- Any earlier repairs or coatings
- What it’s made of, if you know
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
The process
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. Allow most of the day, and we’ll tell you if anything changes.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the next day.
Preparing for the visit
- Let us know about parking or access
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Related advice
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
About our accreditations · Every repair comes with a one-year guarantee.
