Herefordshire · England
Bath Re-enamelling for Newton Farm homes
Full bath re-enamelling and resurfacing at your home in Newton Farm, with a one-year guarantee on every repair.
- Resurfacing from £350
- An outdated colour you’d like to change
- Stains that won’t shift
What we are called out for in Newton Farm
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
These are the problems we’re asked about most:
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
- A dull, rough surface that won’t come clean
Before booking anyone
- A fixed price, and whether VAT is included
- What the guarantee covers, and for how long
- How the colour is matched
- How soon you can use it again
How we handle bath re-enamelling in Newton Farm
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Our technicians work on cast iron baths, pressed steel baths and acrylic baths, and the jobs we see most are staining under the taps and around the waste and a coating lifting around the plughole.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Newton Farm (HR2)
- Area hub
- Herefordshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we cannot put right
A repair is not right for every job, including:
- Holes rusted through the metal
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly.
Materials we work on in Newton Farm
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Newton Farm questions
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Prices and what affects them
Prices start from £350. There’s no charge for travel to Newton Farm. The price comes down to:
- How hard the colour is to match
- Doing more than one item at once
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Any details about the material
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Newton Farm and the surrounding area
Newton Farm is about 1 mile south-west of Hereford, in Herefordshire. From the centre of Newton Farm to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 255 places in Herefordshire. We work right across the region, from Newton Farm to Birmingham (about 46 miles away).
Jobs in HR2 work the same way as everywhere else we cover. That includes homes on Home Lane, Forde Lane and Kilvert Road and the roads around them. Close by, we cover Redhill (1 mile east), Grafton (1 mile south), Bullinghope (1 mile south-east), Hereford (1 mile north-east) and Whitecross (1 mile north). Further out, we also cover Ross-on-Wye (11 miles south-east), Ledbury (13 miles east), Leominster (13 miles north), Merrivale (11 miles south-east), Bromyard (14 miles north-east) and Bobblestock (3 miles north). Newton Farm is among the bigger towns we cover in Herefordshire.
Around Newton Farm
We visit homes around The Hereford Academy, Marlbrook Primary School and Hereford Cathedral Junior School and the streets around them. Also close by are The Treacle Mine pub (0.9 miles north-east) and Church of St Martin (0.7 miles north-east). The nearest railway station is Hereford station, roughly 1.9 miles north-east. Further afield, we also cover the area around Waterworks Museum - Hereford (0.7 miles north) and Hereford General Hospital (1.3 miles north-east). Green spaces nearby include Wyevale Wood and Dinedor Hill.
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a full day. If we find something your pictures didn’t show, we will explain it before carrying on.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the day after.
Preparing for the visit
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Advice
Repair or replace in Newton Farm?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
- Dust sheets down, tidy finish
Read our pricing and bath cost comparison.
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- Wash away dyes and oils after use
- Fix dripping taps quickly
- A quick wipe after use keeps limescale away
- Never use suction bath mats
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Nearby places to Newton Farm
More services for Newton Farm
About our accreditations · Every repair comes with a one-year guarantee.
