Rutland · England
Bath re-enamelling & resurfacing in Ashwell, Rutland
Local bath re-enamelling for Ashwell: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Chips and rust in more than one place

Bath re-enamelling at your home in Ashwell
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include lots of chips and rust spots and an old resurfacing that’s failing, in pressed steel baths, acrylic baths and basins & shower trays.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Ashwell (LE15)
- County
- Rutland
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026

What affects the price in Ashwell
Resurfacing from £350. We don’t charge extra for travel to Ashwell. The price comes down to:
- How hard the colour is to match
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Access to the area
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed price
The better the pictures, the more accurate the price. Here’s what helps:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- The material, if you know it
- Daylight if possible, and no flash reflection
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What we are called out for in Ashwell
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Contact us if you’ve noticed:
- A roll-top that is seen better days
- Several chips and rust patches
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
Before you book anyone
- What happens if they find more damage
- What the guarantee covers, and for how long
- Whether the price covers travel
- Whether the colour is mixed to match
When we’d advise against a repair
It helps to know what we can’t do too:
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
- A metal bath with a through crack
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Ashwell questions
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
How do I get a price for bath re-enamelling in Ashwell?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your LE15 postcode.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Do you come to Ashwell?
Yes. We work across the UK and travel to Ashwell. Send photos and we will quote, or call 0345 017 0787.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
- Dry the bath after use to stop limescale
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Repairing versus replacing in Ashwell
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.
What you get with us
- Work done at your home or business
- We’ll tell you if it’s not worth repairing
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list or guide to resurfacing and replacement costs.
Also in Ashwell
Covering Ashwell
Ashwell is about 3 miles north of Oakham, in Rutland. We visit clients in Ashwell, so there is no workshop to go to. We cover 47 places across Rutland, from the larger towns to small villages. Our jobs stretch from Ashwell to Birmingham (52 miles away).
Postcode districts we cover here: LE15. Local streets include Water Lane, Oakham Road and Cottesmore Road, and we cover them all. If you’re just outside Ashwell, we cover Teigh (2 miles north), Whissendine (3 miles west), Wymondham (3 miles north), Saxby (5 miles north-west) and Garthorpe (5 miles north-west). We also work in nearby towns such as Oakham (3 miles south), Uppingham (9 miles south) and North Luffenham (8 miles south-east).
Landmarks near Ashwell
In Ashwell, that means homes near St Mary's Church and the streets around them. For rail, the closest station is Oakham station, roughly 2.9 miles south. A little further out are Mount Alstoe (1.9 miles south-east) and Rocks by Rail (1.2 miles east). Green spaces nearby include Cribb's Meadow.
The process
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes the best part of a day. We leave the room clean.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Tell us if there are stairs or a lift
- Ensure the area is dry
- Plan for the room to be out of bounds to pets and children
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Read more
Landlords, agents and businesses in Ashwell
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
Landlords, letting agents and housing providers in Ashwell use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.

