Oxfordshire · England
Bath re-enamelling & resurfacing in Aston, Oxfordshire
Bath re-enamelling in and around Aston: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- Wear marks under the taps
About our bath re-enamelling in Aston
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We are frequently asked to fix a dull, rough surface that won’t come clean and a coloured bath you want in white, on basins & shower trays, Victorian roll-tops and pressed steel baths.
All our work comes with our one-year guarantee.
- Where
- Aston (OX18)
- County
- Oxfordshire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
Before booking, it’s worth knowing the limits:
- Problems we cannot see until an old finish comes off
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Aston
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
About Aston
Aston is about 4 miles south of Witney, in Oxfordshire. From the centre of Aston to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 443 towns and villages across Oxfordshire, from the larger towns to small villages. We work right across the region, from Aston to Birmingham (54 miles away).
Every address in OX18 is within our area. Jobs here include addresses on Cote Road, Saxel Close and Woodbridge Close. Close by, we cover Bampton (2 miles west), Weald (2 miles west), Curbridge (3 miles north), Black Bourton (4 miles west) and Clanfield (4 miles west). Further out, we also cover Oxford (12 miles east), Didcot (14 miles south-east), Abingdon-on-Thames (10 miles east), Witney (4 miles north), Carterton (5 miles north-west) and Wantage (10 miles south).
Around Aston
Around Aston, we work in homes near Church of St James and Aston and Cote Church of England Primary School. A little further out are Longworth Hospital (5.7 miles south-west) and Bampton Castle (2.1 miles west).
Nearby places to Aston
What else we do in Aston
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Your questions about bath re-enamelling in Aston
How long is the bath unusable?
Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Which areas do you work in?
Everywhere in the UK, Aston included. There is no extra charge for travel.
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Aston. The price depends on:
- How much damage there is
- Where the damage is and how we get to it
- The material and finish
- The type of damage
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Before you send pictures, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- The material, if you know it
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Don’t leave bottles, razors or sponges standing on the surface
- Rinse off hair dye, oils and bath bombs straight away
- Wipe the bath dry after use in hard water areas
- Do not leave a chip unrepaired
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What happens on the day
We work cleanly and quietly. Protection goes down first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
Get a quote
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Do you need bath re-enamelling in Aston?
Frequently the bath has just had decades of use. The body of the bath is typically perfectly sound.
Send us a picture if you notice any of these:
- A dull, rough surface that will not come clean
- Worn patches where water runs and sits
- An outdated colour you’d like to change
- An old resurfacing that’s failing
Before you book anyone
- If travel is included in the price
- Aftercare advice
- What happens if the damage is worse than the pictures show
- How the colour is matched
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, generally one day. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Aston customers choose us
- CHAS and Constructionline accredited
- Same prices wherever you are
- Typically one visit, start to finish
- One-year guarantee on every repair
Take a look at our pricing and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
