Highland · Scotland
Bath Re-enamelling for Avoch homes
Full bath re-enamelling and resurfacing in Avoch, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
Bath re-enamelling in Avoch without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair acrylic baths, pressed steel baths and Victorian roll-tops, and people most frequently call us about an old resurfacing that’s failing and an original cast iron bath that needs restoring.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Avoch (IV9)
- Area hub
- Highland
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
Some jobs aren’t right for a repair, including:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- A bath split right through the body
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Also in Avoch
Prices and what affects them
Prices start from £350. There is no charge for travel to Avoch. The price depends on:
- How many items we do on one visit
- How hard the colour is to match
- The type of damage
- How much damage there is
Our prices are the same across the UK, so there is no premium for Avoch. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- Natural light rather than flash
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- One picture of the whole bath
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
The process
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a full day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let us know which floor the room is on
- Make sure the area is dry
- Keep children and pets away from the room on the day
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Advice
Keeping it looking good
It’s all simple stuff:
- Store bottles off the bath
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What we are called out for in Avoch
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
You may need us if you’ve spotted any of these:
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
- Thin, worn enamel in places
Questions to ask before booking
- How the colour is matched
- How the room is protected while they work
- Whether a trained technician does the job
- What happens if they find more damage
About Avoch
Avoch is about 7 miles north of Inverness, in Highland. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 253 towns and villages in Highland.
Postcode districts we cover here: IV9. Jobs here include addresses on High Street, Station Road and Long Road and the roads around them. Other places close to Avoch include Fortrose (2 miles north-east), Killen (2 miles north-west), Rosemarkie (3 miles north-east), Munlochy (3 miles west) and Ardersier (5 miles east). Within a short drive, we also cover Inverness (7 miles south), Nairn (11 miles east), Cradlehall (6 miles south), Merkinch (6 miles south-west), Dingwall (10 miles west) and Hilton (7 miles south). For island and remote addresses, ring us first and we will plan the trip.
Landmarks near Avoch
Typical jobs here are in homes near Free Church. Other landmarks nearby include Ormond Castle (1 mile south) and Groam House Museum (2.8 miles north-east). For a walk, there’s Fairy Glen and Ord Hill.
Work for landlords and builders
If you manage property in Avoch, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Why repair rather than replace?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
What you get with us
- One-year guarantee on every repair
- Typically one visit, start to finish
- CHAS and Constructionline accredited
- Nothing taken out or refitted
Take a look at our full price list or bath cost comparison.
Avoch questions
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
How long will the bath be out of use?
Normally one day, with the bath ready the day after. A badly pitted bath can need a second day.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Do the materials smell?
There may be a mild smell during the work.
About our accreditations · Every repair comes with a one-year guarantee.
