South Ayrshire · Scotland
Bath re-enamelling & resurfacing in Ayr, South Ayrshire
Damaged bath in Ayr? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Stains that won’t shift
- A bath in a colour that no longer suits
Questions from Ayr
Do you come to Ayr?
We do. We send a technician to Ayr for every job, and the price is the same as everywhere else.
What happens if you find more damage?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Can I get a quote without a visit?
Typically, yes. Clear photos let us give you a fixed quote without visiting.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Bath re-enamelling at your home in Ayr
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s staining under the taps and around the waste and an original cast iron bath that needs restoring, we can normally put it right, on Victorian roll-tops, pressed steel baths and basins & shower trays alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Ayr (KA7, KA8, KA6)
- Area hub
- South Ayrshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Ayr
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why us?
- No extra charge for your area
- Technicians who travel to you, UK-wide
- CHAS and Constructionline accredited
- No need to remove anything
Read our pricing or bath cost comparison.
When we’d advise against a repair
In fairness, there are a few things a repair will not fix:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
If in doubt, send photos and we’ll say what we think.
What we work on
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Store bottles off the bath
- Never use suction bath mats
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Signs you need bath re-enamelling in Ayr
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
The things customers typically mention when they call are:
- Wear marks under the taps
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Before you book anyone
- Who will actually do the work
- How long it needs to cure
- How your room will be protected
- Whether the price is fixed and includes VAT
What we do, step by step
You do not need to empty the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take a full day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
Getting a price
Send us a picture of the damage and one of the whole item, with your KA7 postcode, and we’ll reply with a fixed price.
Read more
Landlords, agents and businesses in Ayr
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams in South Ayrshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
About Ayr
Ayr is about 31 miles south-west of Glasgow, in South Ayrshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. We cover 52 places in South Ayrshire, from the larger towns to small villages. Our jobs stretch from Ayr to Glasgow (31 miles away).
Postcode districts we cover here: KA7, KA8 and KA6. You will find streets such as Ellisland Square, Station Road and Burns Statue Square, and we cover them all. You’ll find Ayr on the A70 and A77, which makes it straightforward to reach. Nearby, we also work in Belmont (1 mile south), Forehill (1 mile south-east), Montgomerieston (1 mile north-west), Seafield (1 mile south-west) and Alloway (2 miles south). Larger places within reach include Troon (7 miles north), Prestwick (3 miles north), Maybole (7 miles south), Drongan (6 miles east), Joppa (4 miles east) and Barassie (8 miles north). Being one of South Ayrshire’s larger places, Ayr is somewhere we visit frequently.
What’s near Ayr
We visit homes around Railway Tavern, Wellington School and St Andrews Church, among other places. There’s a railway station in Ayr itself: Ayr station. A little further out are Tam Oshanter Museum (0.5 miles north-west) and Seafield Children's Hospital (0.9 miles south-west). For a walk, there’s Carcluie Loch.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Towns and villages near Ayr
More services for Ayr
About our accreditations · Every repair comes with a one-year guarantee.
