Scottish Borders · Scotland
Bath Re-enamelling for Ayton homes
Problem with your bath in Ayton? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- An outdated colour you’d like to change
Bath re-enamelling in Ayton without replacing anything
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on acrylic baths, cast iron baths and pressed steel baths, and people most frequently call us about a coating lifting around the plughole and an outdated colour you’d like to change.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Ayton (TD14)
- Region
- Scottish Borders
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Ayton
Ayton is about 7 miles north-west of Berwick-upon-Tweed, in the Scottish Borders. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Our repair technicians cover all 89 towns and villages in the Scottish Borders, from the larger towns to small villages. You can also see our page for Edinburgh, about 42 miles away.
Here we cover the TD14 postcode area. Jobs here include addresses on High Street, Shearlaw Road and Lawfield Drive and the roads around them. Neighbouring places we cover include Burnmouth (2 miles east), Eyemouth (2 miles north-east), Reston (3 miles west), Coldingham (3 miles north) and Scottish Borders (3 miles north).
What’s near Ayton
Around Ayton, we work in homes near Ayton Parish Church and the streets around them. For rail, the closest station is Reston station, roughly 2.6 miles west of the centre. Well-known places in the area include Eyemouth Museum (2.5 miles north-east) and Ferney Castle (2.6 miles west). Open spaces near Ayton include Ayton Hill and Mire Loch.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Ayton: your questions answered
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is there any odour?
There may be a mild smell during the work.
Can you fix a peeling bath coating?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What happens after I send pictures?
We review the photos and send a fixed quote and the next dates we have.
Can I add another job to the visit?
Of course, and it usually saves money. Just add the extra items to your pictures and you’ll get one combined price.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so mention it when you send pictures.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
What happens on the day
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow most of the day. Before we go, we will explain when it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.
Related advice
What we’re called out for in Ayton
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Keep an eye out for these signs:
- A peeling or bubbling previous coating
- Wear marks under the taps
- Stains that won’t shift
- Several chips and rust patches
Comparing quotes
- What protection goes down before work starts
- When it can be used again
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Work done at your home or business
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
- We leave the room as we found it
Read our prices page and resurfacing vs replacement cost guide.
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- What the surface is made of
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- The colour and finish to match
We charge the same wherever you are, so there is no premium for Ayton. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your pictures
You can usually get a fixed quote without us visiting. To make it quick:
- Daylight if possible, and no flash reflection
- Details of any past repairs
- The material, if you know it
- Your postcode, so we can check dates
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Also in Ayton
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
- A bath split right through the body
Send us pictures and we’ll tell you honestly.
What we work on
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Landlord and trade work in Ayton
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Housing associations and facilities teams use us for planned and reactive repairs in the Scottish Borders and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
