North Yorkshire · England
Bath Re-enamelling for Azerley homes
Full bath re-enamelling and resurfacing for homes and businesses in Azerley and across North Yorkshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
How we handle bath re-enamelling in Azerley
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair Victorian roll-tops, pressed steel baths and acrylic baths, and common reasons people get in touch are a bath in a colour that no longer suits and an original cast iron bath that needs restoring.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Azerley (HG4)
- County
- North Yorkshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Azerley and nearby
Azerley is about 4 miles north-west of Ripon, in North Yorkshire. Whether you are in the middle of Azerley or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Azerley is one of 626 places in North Yorkshire where we work. We work right across the region, from Azerley to Leeds (about 25 miles away).
All of HG4 is within our area. Neighbouring places we cover include Galphay (1 mile south-west), Mickley (2 miles north), Kirkby Malzeard (2 miles west), Winksley (2 miles south) and Laverton (2 miles south-west). We also work in nearby towns such as Harrogate (12 miles south), Knaresborough (12 miles south-east), Ripon (4 miles south-east), Catterick Garrison (15 miles north), Northallerton (14 miles north-east) and Starbeck (12 miles south).
What’s near Azerley
A little further out are The Workhouse Museum (3.8 miles south-east) and Mowbray Castle (2.2 miles north-west). Not far away are Eavestone Lake.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Towns and villages near Azerley
What else we do in Azerley
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly work with letting and managing agents. Send the address, pictures and access details.
Common problems we fix in Azerley
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Look out for these signs:
- Staining under the taps and around the waste
- Chips and rust in more than one place
- Thin, worn enamel in places
- An old resurfacing that’s failing
What to look for in a quote
- What happens if they find more damage
- Who will actually do the work
- Whether they match the colour on site
- How long the guarantee is and what it covers
What affects the price in Azerley
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- Any earlier repairs that need removing first
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
We charge the same wherever you are, so there’s no premium for Azerley. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Any details about the material
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Azerley: your questions answered
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
How much does bath re-enamelling cost in Azerley?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Repair or replace in Azerley?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. The full price is agreed before you book.
Why us?
- Straight answers about what a repair can do
- No need to remove anything
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
See our full price list or guide to resurfacing and replacement costs.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Store bottles off the bath
- A dripping tap should be fixed promptly
- Use washing-up liquid and a soft cloth
- Have chips seen to early
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
