West Sussex · England

Bath re-enamelling & resurfacing in Balcombe Lane, West Sussex

Problem with your bath in Balcombe Lane? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Resurfacing from £350
  • Several chips and rust patches
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Balcombe Lane

How we handle bath re-enamelling in Balcombe Lane

We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Whether it’s chips and rust in more than one place and an original cast iron bath that needs restoring, we can generally put it right.

Your repair is guaranteed for a year, as with every job we do.

Location
Balcombe Lane (RH17)
County
West Sussex
Cover
12 months on all our work
Quote
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026
Before and after: an old basin refinished to bright white

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

How it works

We begin by going over the job with you. Then the area is sheeted and masked and the work begins. It normally takes most of the day, and we’ll keep you posted as we go.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Plan for the room to be out of bounds to pets and children
  • Open a window if you can

How to get a price

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.

Get a free quote

Read more

Landlords, agents and businesses in Balcombe Lane

If you manage property in Balcombe Lane, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Where we work around Balcombe Lane

Balcombe Lane is about 4 miles south-east of Crawley, in West Sussex. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Balcombe Lane is one of 371 places in West Sussex where we work. Our jobs stretch from Balcombe Lane to London (29 miles away).

Here we cover the RH17 postcode area. We also cover the places around Balcombe Lane: Balcombe (1 mile south), Worth Abbey (2 miles north-east), Furnace Green (2 miles north-west), Pease Pottage (3 miles west) and Staplefield (3 miles south-west). Within a short drive, we also cover Crawley (4 miles north-west), Horsham (8 miles west), Haywards Heath (5 miles south), Burgess Hill (8 miles south), East Grinstead (6 miles north-east) and Broadfield (4 miles north-west).

Near you in Balcombe Lane

In Balcombe Lane, that means homes near Balcombe CofE Controlled Primary School, Oriel High School and The Parish Church of St Mary. The closest station to Balcombe Lane is Balcombe station, roughly 1.3 miles south of the centre. Further afield, we also cover the area around Crawley Museum (3.9 miles north-west) and Waterbury Castle (4.8 miles south-east). Open spaces near Balcombe Lane include Blunts Wood and Paiges Meadow and Tilgate Lake.

Map of Balcombe Lane © OpenStreetMap contributors

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

What we cannot put right

To be straight with you, there are a few things a repair won’t fix:

  • A bath that’s rusted through
  • A poorly supported acrylic bath, until it’s firmed up
  • A metal bath with a through crack

If in doubt, send photos and we will say what we think before you book.

Materials we repair

  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths

What bath re-enamelling costs

Resurfacing from £350. You won’t pay by the hour. The price depends on:

  • Whether old repairs or coatings need taking off
  • What the surface is made of
  • Whether we combine several jobs
  • How hard the colour is to match

A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.

Send photos for a quote

Most quotes are done from pictures alone. To make it quick:

  • A coin beside the damage so we can judge size
  • Details of any past repairs
  • Daylight if possible, and no flash reflection
  • A close-up of the damage, in focus

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Why repair rather than replace?

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Prices start from £350. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • Fixed prices from your pictures
  • Every repair guaranteed for a year
  • Dust sheets down, tidy finish
  • Colours mixed by hand to suit your surface

Read our pricing or guide to resurfacing and replacement costs.

How to care for the repair

Simple care helps the repair last. We recommend:

  • Respect the curing time we give you
  • Dry the bath after use to stop limescale
  • Clean with a soft cloth and mild detergent
  • Rinse off hair dye, oils and bath bombs straight away

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.

Your questions about bath re-enamelling in Balcombe Lane

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Can you do the outside of a roll-top?

Yes, frequently. We resurface the inside, and the outside can be refinished too.

Can you repair several things at once?

Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.

Will there be a smell?

There can be some smell while we work, so we ventilate the room. It clears as the materials cure.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

When can you do it?

That depends on our diary for your area. We will offer you dates when we send your quote.

Can you repair something that is been repaired before?

Generally, yes. Let us know what was used before.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.