Bristol · England
Bath re-enamelling & resurfacing in Baptist Mills, Bristol
Full bath re-enamelling and resurfacing for homes and businesses in Baptist Mills and across Bristol. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Wear marks under the taps
- An outdated colour you’d like to change
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take the best part of a day, including clearing up.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
- Open a window if you can
Ask for a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Bath re-enamelling in Baptist Mills, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for chips and rust in more than one place and worn patches where water runs and sits, across Victorian roll-tops, basins & shower trays and acrylic baths.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Baptist Mills (BS5, BS2, BS6)
- Area hub
- Bristol
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Baptist Mills
More services for Baptist Mills
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What we are called out for in Baptist Mills
Many baths we resurface have simply been well used. The body of the bath is normally perfectly sound.
People typically call us after spotting something like this:
- Stains that will not shift
- Worn patches where water runs and sits
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Before you book anyone
- Aftercare advice
- Whether they match the colour on site
- How soon you can use it again
- What happens if they find more damage
How to look after the repair
Aftercare is simple:
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- Fix dripping taps quickly
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Baptist Mills. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- Colours mixed by hand to suit your surface
- One price list for the entire UK
- CHAS and Constructionline accredited
- One-year guarantee on every repair
Read our prices page or bath cost comparison.
Landlords, agents and businesses in Baptist Mills
We regularly work with letting and managing agents. Send the address, photos and access details.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Our work in Baptist Mills
Baptist Mills is about 1 mile north-east of Bristol, in Bristol. Jobs in Baptist Mills are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Baptist Mills is one of 89 places in Bristol where we work. You can also see our page for Birmingham, about 75 miles away.
Our visits in BS5, BS2 and BS6 are booked in the same way as anywhere else. You’ll find streets such as Eve Road, Fox Road and Dove Lane. With the M32 and A4032 close by, Baptist Mills is easy for our technicians to reach. We also travel to St Werburghs (1 mile north), St Pauls (1 mile west), Lower Easton (1 mile east), Upper Easton (1 mile south-east) and Montpelier (1 mile west). We also work in nearby towns such as Soundwell (3 miles east), Ashton Gate (3 miles south-west), Hartcliffe (4 miles south), Staple Hill (3 miles east), Brentry (3 miles north-west) and Sea Mills (3 miles north-west).
Landmarks near Baptist Mills
We visit homes around Fairfield High School, Prince Of Wales Public House and North Bristol Post 16 Centre and the streets around them. You’ll also find Evergreen Primary Academy (less than half a mile east), Parkway Methodist Church (less than half a mile north-west) and Mina Road Park (less than half a mile north). There’s a railway station in Baptist Mills itself: Stapleton Road station. Further afield, we also cover the area around Cabot Circus (0.7 miles south-west) and Bristol Castle (0.9 miles south-west). Not far away are Tarn Lake and Purdown.
- Local facilities include Barton Regis Rural District (0.8 miles north-east)
What a repair cannot fix
A few problems are outside what a surface repair can do:
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Your questions about bath re-enamelling in Baptist Mills
Do you come to Baptist Mills?
Yes. We cover the entire UK and come to Baptist Mills and the rest of Bristol. Send photos and we will quote, or call 0345 017 0787.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Do you resurface freestanding baths?
Yes. Inside and out.
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we look at:
- Whether we combine several jobs
- Unusual colours or finishes
- The type of damage
- Where the damage is and how we get to it
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
How to get a fixed price
When you take your pictures, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- A wider photo showing the whole bath
- Natural light rather than flash
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
