Bristol · England
Bath Re-enamelling in St Pauls
Bath re-enamelling in St Pauls without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in St Pauls
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
How we handle bath re-enamelling in St Pauls
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for a coating lifting around the plughole and a bath that stays dull however much you clean it, across pressed steel baths, acrylic baths and Victorian roll-tops.
Whatever the size of the job, you get the same one-year guarantee in St Pauls and across Bristol.
- Where
- St Pauls (BS2, BS6, BS1)
- Region
- Bristol
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why St Pauls customers choose us
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- One visit for most repairs
- One-year guarantee on every repair
Read our prices page and bath cost comparison.
What affects the price in St Pauls
Resurfacing from £350. There’s no charge for travel to St Pauls. The price depends on:
- What the surface is made of
- How much damage there is
- The type of damage
- Unusual colours or finishes
We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Two or three clear pictures are typically enough. It helps if you send:
- Any details about the material
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
- Details of any past repairs
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Do you need bath re-enamelling in St Pauls?
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
People usually call us when they notice something like this:
- An old resurfacing that is failing
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- Wear marks under the taps
Comparing quotes
- How changes to the job are handled
- How the room is protected while they work
- Who will actually do the work
- Whether the price covers travel
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Questions from St Pauls
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your BS2 postcode.
What happens after I send photos?
We review the photos and send a fixed quote and the next dates we have.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Which areas do you work in?
We cover the entire UK, including St Pauls and the rest of Bristol. Just include your postcode and we’ll offer you dates.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
The process
The work is clean and fairly quiet. Protection goes down first, then the work takes most of the day. At the end we talk you through the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Let the surface dry out before the visit
- Open a window if you can
- Mention if the room is upstairs or in a flat
Ask for a price
If you’re in St Pauls and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
About St Pauls
St Pauls is about 1 mile north-east of Bristol, in Bristol. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 89 places across Bristol, from the larger towns to small villages. Our nearest city page is Birmingham, about 75 miles away.
All of BS2, BS6 and BS1 is covered. Jobs here include addresses on Dove Lane, City Road and York Road. Being close to the A4032, St Pauls is easy for our repair technicians to reach. Nearby, we also work in Montpelier (1 mile north-west), Baptist Mills (1 mile east), St Werburghs (1 mile north-east), St Jude's (1 mile south) and Bristol (1 mile south-west). Further out, we also cover Soundwell (3 miles east), Mayfield Park (3 miles east), Hartcliffe (4 miles south), Staple Hill (4 miles east), Brentry (3 miles north) and Sea Mills (3 miles north-west).
Around St Pauls
Typical jobs here are in homes near Church of St Agnes with St Simon, North Bristol Post 16 Centre and Montpelier High School, among other places. Other local landmarks include St Barnabas Church of England VC Primary School (under half a mile north-east), Riverside Park (within half a mile south-east) and Prince Of Wales Public House (less than half a mile east). There is a railway station in St Pauls itself: Montpelier station. A little further out are Bristol Castle (0.7 miles south) and Palestine Museum and Cultural Centre Bristol (0.9 miles south-west). Not far away are Tarn Lake and Brandon Hill.
- Parks and local facilities nearby include Avon (1.1 miles south)
Also near St Pauls
More services for St Pauls
About our accreditations · Every repair comes with a one-year guarantee.
