Leicestershire · England
Bath Re-enamelling for Barlestone homes
Full bath re-enamelling and resurfacing in Barlestone, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- Stains that will not shift
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Bath re-enamelling in Barlestone, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. If you are dealing with worn patches where water runs and sits and a peeling or bubbling previous coating, we can usually put it right, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Barlestone (CV13)
- County
- Leicestershire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
- Repair dripping taps early
- Keep suction mats out of the bath
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Repair or replace in Barlestone?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the whole surface without moving it. Prices start from £350. We charge the same wherever you are, with no extra for Barlestone. The job itself decides the price: the material, the amount of damage and how many items.
Why Barlestone clients choose us
- We come to you, anywhere in the UK
- No extra charge for your area
- No need to remove anything
- Colour mixed on the day to match
Take a look at our pricing or guide to resurfacing and replacement costs.
How it works
You do not need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. It typically takes the best part of a day, and you are welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Keep a parking space free if you can
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Advice
Barlestone: your questions answered
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
How long is the bath unusable?
Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Are there extra charges for Barlestone?
No. Our quotes include travel, with the same prices everywhere we work.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Do you come to Barlestone?
Yes. We cover the entire UK and come to Barlestone. Send us pictures for a fixed quote, or call 0345 017 0787.
Places near Barlestone
Other services in Barlestone
Can I fix it myself?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- Where the damage is and how we get to it
- The colour and finish to match
- The size and number of damaged areas
- Doing more than one item at once
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- Where you are, by postcode
- Any details about the material
- One sharp close-up of the damage
- A wider photo showing the entire bath
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Common problems we fix in Barlestone
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
If you can see any of these, send us a picture:
- Thin, worn enamel in places
- A roll-top that’s seen better days
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
Questions to ask before you book
- Is the price fixed, and does it include VAT?
- How long the guarantee is and what it covers
- What happens if they find more damage
- Whether the colour is mixed to match
Covering Barlestone
Barlestone is about 5 miles south of Coalville, in Leicestershire. From the centre of Barlestone to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Barlestone is one of 287 towns and villages in Leicestershire where we work. We work right across the region, from Barlestone to Birmingham (about 25 miles away).
We cover every part of CV13. Jobs here include addresses on Church Road, West End and New Street and the roads around them. Nearby, we also work in Osbaston Hollow (1 mile west), Osbaston (1 mile south), Newbold Heath (1 mile east), Nailstone (1 mile north-west) and Newbold Verdon (2 miles south-east). We also work in nearby towns such as Loughborough (11 miles north-east), Hinckley (7 miles south), Wigston (12 miles east), Coalville (5 miles north), Ashby-de-la-Zouch (8 miles north-west) and Shepshed (9 miles north).
Near you in Barlestone
In Barlestone, that means homes near The Market Bosworth School, Barlestone Church of England Primary School and The Three Tuns pub and the streets around them. Other landmarks nearby include Shackerstone railway station (3.1 miles west). Not far away are Ambion Hill.
About our accreditations · Every repair comes with a one-year guarantee.
